Amazon Black Friday Week deals

Paid link

Storage · How-to guide

How to Install a 2.5-Inch SSD in a Desktop

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To install a 2.5-inch SSD in a desktop, shut the PC down, unplug it, and open the case following the maker's manual. Mount the drive in a 2.5-inch bay or adapter bracket, then connect a SATA data cable to the motherboard and a SATA power cable from the power supply. Close the case, plug the PC back in, and set up the drive in your system settings.

  1. Shut down and open the case

    Shut the PC down and unplug the power cable before you open anything. Follow the maker's manual for your case to remove the side panel, and touch a bare metal part of the case to discharge static before you handle the drive. Keep the screws from the panel in a small dish so they do not get lost. If the PC is still under warranty, check the maker's manual first, since opening the case can affect coverage. Contact the maker if the manual tells you not to open it.

  2. Mount the drive in a bay

    Find a free 2.5-inch bay in the case. If the bay is larger than the drive, fit the drive into an adapter bracket first, then slide the bracket into a free bay. Line up the screw holes on the sides or bottom of the drive with the holes in the bay or bracket. Fasten the drive with the screws that came with the case or bracket, and leave it snug without forcing the screws.

  3. Connect the SATA cables

    Connect one end of a SATA data cable to the small L-shaped port on the drive and the other end to a free SATA port on the motherboard. Then connect a SATA power cable from the power supply to the wider L-shaped port on the drive. Push each connector in straight until it sits flat, and check that the cables do not press against a fan. The connectors only fit one way, so do not force a plug that does not slide in.

  4. Set up the drive

    Close the case, plug the PC back in, and turn it on. Open your system settings and look for the new drive in the storage or disk list. If the drive does not show up, shut the PC down, unplug it, and check that both cables sit flat in their ports. Once the drive shows up, you can format it and choose it as the place to store files or install programs.

What you need

PNY CS900 500GB 2.5" SATA III Internal

PNY CS900 500GB 2.5" SATA III Internal

A 500GB 2.5-inch SATA III SSD with read speeds of up to 550 MB/s and a 3-year warranty.

View on Amazon
SanDisk SSD Plus

SanDisk SSD Plus

A 500GB 2.5-inch SATA III SSD, 7mm thick, with read speeds of up to 545 MB/s and shock-resistant build.

View on Amazon
PNY CS900 250GB 2.5" SATA III Internal

PNY CS900 250GB 2.5" SATA III Internal

A 250GB 2.5-inch SATA III SSD with read speeds of up to 535 MB/s and a 3-year warranty.

View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD

Kingston 960GB A400 SATA3 2.5" Internal SSD

A 960GB 2.5-inch SATA3 SSD for replacing a hard drive, with a limited 3-year warranty.

View on Amazon

These come from our ranked list Best Internal SATA SSD, which compares them spec by spec.

FAQ

Do I need an adapter bracket for a 2.5-inch SSD?

Some cases include a 2.5-inch bay behind the motherboard tray or under the drive cage, so check your case manual first. If there is no bay, an adapter bracket holds the drive in a larger bay.

Which cables does a 2.5-inch SATA SSD need?

It needs a SATA data cable to the motherboard and a SATA power cable from the power supply. Check your power supply for a spare SATA power connector and your motherboard box for a SATA data cable before you start.

Will the PC see the new SSD right away?

The drive should show up in your system storage or disk list once both cables are connected. If it does not show up, shut the PC down, unplug it, and check both cable connections. You may need to format the drive before you can store files on it.

Ranked internal ssds guides