Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Connect a Water Cooler to a Motherboard

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A water cooler connects to the motherboard through its mounting bracket, its pump cable, and its radiator fan cables. First check that the cooler lists your socket, then shut the PC down, unplug it, and fit the bracket. The steps below cover mounting, the pump connection, the fan connections, and the final check.

  1. Check the socket and the case

    Start by checking that the cooler lists your motherboard socket. The ARCTIC coolers fit LGA1851, LGA1700, AM4, and AM5, the Peerless Assassin fits AMD AM4 and AM5 and Intel LGA 1700, 1150, 1151, 1200, and 1851, and the HydroShift II fits LGA 1851 and 1700 and AMD AM5 and AM4. Check that the radiator fits your case and that the hoses reach the mounting spot, using the maker's manual for the measurements.

  2. Mount the pump on the CPU

    Shut the PC down and unplug it before you open the case, and follow the maker's manual for the install. Fit the mounting hardware for your socket: the ARCTIC coolers use a contact frame for Intel LGA1851 and LGA1700 and native offset mounting for Intel and AMD, which shifts the cold plate toward the CPU hotspot. Seat the pump on the CPU and tighten the screws in the order the manual gives.

  3. Connect the pump cable

    Find the pump cable coming from the pump and plug it into the motherboard header named in the cooler's manual. On the ARCTIC coolers, the radiator fan PWM cables run inside the sheathing of the hoses, so only a single visible cable connects to the motherboard. Route the cable away from the fans so it cannot catch on a blade.

  4. Connect the radiator fans

    Plug each radiator fan cable into a motherboard fan header, or into the cooler's own cable routing where the model provides it. The ARCTIC coolers integrate the fan PWM cables into the hose sheathing, and the HydroShift II fans are controlled through L-Wireless and motherboard integration. Check that every fan connector is fully seated before you close the case.

  5. Mount the radiator and power on

    Mount the radiator in the case where the manual shows, with the fans facing the direction the manual gives. The HydroShift II radiator measures 400 by 122 by 24 mm and fits approximately 90% of mainstream cases. Power the PC on and check that the pump and the fans run, then watch the temperatures in the software or BIOS the manual points to.

What you need

ARCTIC Liquid Freezer III Pro 360 A-RGB

ARCTIC Liquid Freezer III Pro 360 A-RGB

A 360 mm AIO with an integrated VRM fan and cable management that leaves a single visible cable to the motherboard, for LGA1851, LGA1700, AM4, and AM5.

View on Amazon
Thermalright Peerless Assassin 120 SE CPU Cooler

Thermalright Peerless Assassin 120 SE CPU Cooler

A dual-tower air cooler with 6 heat pipes and two 120 mm PWM fans at 1550 RPM, for AMD AM4 and AM5 and Intel LGA 1700 and 1851.

View on Amazon
ARCTIC Liquid Freezer III Pro 360

ARCTIC Liquid Freezer III Pro 360

A 360 mm AIO with 3 120 mm fans, an integrated VRM fan, and cable management that leaves a single visible cable to the motherboard.

View on Amazon
LIAN LI HydroShift II Curved 360 TL Flex AIO Cooler-Black-HS2OLDC36TB

LIAN LI HydroShift II Curved 360 TL Flex AIO Cooler-Black-HS2OLDC36TB

A 360 mm AIO with a motorized 6.67-inch 2K OLED pump head, 3 120 mm fans up to 2600 RPM, and control through L-Connect 3 software.

View on Amazon

These come from our ranked list Best Cooler for PC, which compares them spec by spec.

FAQ

Where does the pump cable plug in?

It plugs into the motherboard header named in your cooler's manual. On the ARCTIC coolers, the radiator fan PWM cables run inside the hose sheathing, so only a single visible cable reaches the motherboard. Check the manual for your model before you power on.

Can I use an AIO cooler on any motherboard?

No. The cooler must list your socket. The ARCTIC coolers fit LGA1851, LGA1700, AM4, and AM5, the HydroShift II fits LGA 1851 and 1700 and AMD AM5 and AM4, and the Peerless Assassin fits AMD AM4 and AM5 and Intel LGA 1700, 1150, 1151, 1200, and 1851.

Does the cooler need software to run?

The HydroShift II uses L-Connect 3 software to manage its motorized pump head, while its fans are controlled through L-Wireless and motherboard integration. For any other model, follow the setup steps in its manual.

Ranked cpu coolers guides