Amazon Black Friday Week deals

Paid link

Storage · How-to guide

How to Connect a SATA SSD

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To connect a SATA SSD, plug a SATA data cable from the drive to a SATA port on the motherboard and a SATA power cable from the power supply to the drive. The drive fits a 2.5 inch bay in a desktop or a 2.5 inch slot in a laptop. Once both cables are seated, the drive shows up in the system for setup.

  1. Check the drive, bay and ports

    All four drives here are 2.5 inch SATA III drives, so check that your computer has a free SATA port on the motherboard, a spare SATA power connector from the power supply, and a 2.5 inch bay or slot for the drive. A laptop needs a 2.5 inch bay with a SATA connector, so check the laptop manual before you buy. Match the drive size to the bay and the interface to the port.

  2. Shut down and unplug first

    Shut the computer down and unplug it before you open the case, and follow the steps in the maker's manual for your model. Handle the drive by its edges and keep it in its packaging until you are ready to fit it. If the computer is still under warranty, contact the maker before you open it.

  3. Connect the data and power cables

    Slide the drive into the bay and fix it with the screws or tray the case provides. Plug one end of a SATA data cable into the drive and the other end into a SATA port on the motherboard. Then plug a SATA power connector from the power supply into the drive. Push each plug in until it sits flat, with the cable running clear of fans and moving parts.

  4. Check the drive shows up

    Plug the computer back in and switch it on, then check that the new drive appears in the operating system. If the drive does not appear, shut the computer down, unplug it, and check that both cables are fully seated. A new drive still needs to be set up in the operating system before it holds files, so follow the steps your system gives for a new drive.

What you need

PNY CS900 500GB 2.5" SATA III Internal

PNY CS900 500GB 2.5" SATA III Internal

A 500 GB 2.5 inch SATA III SSD with read speeds of up to 550 MB/s, backwards compatible with SATA II, and a 3 year warranty.

View on Amazon
SanDisk SSD Plus

SanDisk SSD Plus

A 500 GB 2.5 inch, 7 mm SATA III 6 Gb/s SSD with read speeds of up to 545 MB/s and a 3 year limited warranty.

View on Amazon
PNY CS900 250GB 2.5" SATA III Internal

PNY CS900 250GB 2.5" SATA III Internal

A 250 GB 2.5 inch SATA III SSD with read speeds of up to 535 MB/s, backwards compatible with SATA II, and a 3 year warranty.

View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD

Kingston 960GB A400 SATA3 2.5" Internal SSD

A 960 GB 2.5 inch SATA3 SSD with a 3 year limited warranty, made as a hard drive replacement.

View on Amazon

These come from our ranked list Best Internal SATA SSD, which compares them spec by spec.

FAQ

Does a SATA SSD need a power cable?

Yes. A SATA SSD takes two connections: a data cable to the motherboard and a power cable from the power supply. The drive does not run on the data cable alone.

Can I connect a SATA SSD to a laptop?

Yes, if the laptop has a 2.5 inch bay with a SATA connector. Check the laptop manual for the bay size and the connector type before you buy, and look for a laptop with a 2.5 inch bay and a SATA connector.

Will a SATA III SSD work with a SATA II port?

The PNY CS900 drives list backwards compatibility with SATA II 3GB/sec, so they connect to a SATA II port. Check the notes for the drive you buy, since each model lists its own compatibility.

Ranked internal ssds guides