How to Connect a SATA Cable to an SSD
Connect the SATA data cable to the small L-shaped port on the SSD and to a SATA port on the motherboard, then connect the SATA power cable from the power supply to the wider port on the SSD. Mount the 2.5-inch drive in a drive bay or bracket, close the case, and boot the computer to check the drive is detected.
Shut down and open the case
Shut the computer down fully and unplug it from the wall before you open it. Follow the maker's manual for your desktop or laptop to open the case and find the drive bay. Work on a steady surface, and keep screws and small parts where you can find them again.
Find the SATA ports and cables
Find a free SATA port on the motherboard and the SATA data cable that plugs into it. Find the SATA power connector on a cable from the power supply; it is wider than the data connector and fits the wider port on the drive. Check the manual for where a 2.5-inch drive mounts in your case.
Connect the data cable
Push one end of the SATA data cable into the smaller port on the SSD until it sits flat and firm. Push the other end into the SATA port on the motherboard the same way. The connector fits one way only, so do not force it; turn it over if it does not slide in.
Connect power and mount the drive
Push the SATA power connector from the power supply into the wider port on the SSD until it sits flat. Mount the drive in the bay or bracket with the screws or tool-free mount the case provides, then close the case and plug the computer back in. Boot up and check the drive shows in your system settings or disk utility before you store files on it.
What you need

PNY CS900 500GB 2.5" SATA III Internal
A 500GB 2.5-inch SATA III SSD with rated read speeds up to 550MB/s and a 3 Year warranty.
View on Amazon
SanDisk SSD Plus
A 500GB 2.5-inch SATA III 6 Gb/s SSD with read speeds up to 545MB/s and a 3 Year Limited warranty.
View on Amazon
PNY CS900 250GB 2.5" SATA III Internal
A 250GB 2.5-inch SATA III SSD with rated read speeds up to 535MB/s and a 3 Year warranty.
View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD
A 960GB 2.5-inch SATA3 SSD with a Limited 3 Year warranty for replacing a hard drive.
View on AmazonThese come from our ranked list Best Internal SATA SSD, which compares them spec by spec.
FAQ
Which cable connects an SSD to the motherboard?
A SATA data cable. One end plugs into the SSD and the other into a SATA port on the motherboard, while a separate SATA power cable from the power supply powers the drive.
Does a SATA SSD need a power cable?
Yes. The data cable carries data only, so connect the SATA power cable from the power supply to the wider port on the drive, or the computer will not detect it.
What if the SSD does not show up?
Shut the computer down and unplug it, then push both cables firmly into the drive and the motherboard and check the power cable is seated. Boot up again and look for the drive in your system settings or disk utility.




