Amazon Black Friday Week deals

Paid link

Storage · How-to guide

How to Connect a Laptop SSD to a Desktop

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A laptop SSD connects to a desktop through the connector it used in the laptop. An M.2 NVMe drive goes into an M.2 slot on the desktop motherboard, or into a PCIe adapter card, while a 2.5-inch SATA drive uses a SATA data cable and a SATA power cable. If you do not want to open the case, a USB enclosure that matches the drive's form factor works instead.

  1. Identify your laptop SSD

    Look at the drive itself to find its form factor. A laptop SSD is either a small stick with a notched edge connector, called M.2, or a flat rectangle about the size of a phone, called 2.5-inch. An M.2 drive has a notched edge connector, and a 2.5-inch drive has two L-shaped connectors on one edge. Write down the form factor before you buy anything, because an M.2 drive and a 2.5-inch drive need different cables and slots.

  2. Check the desktop for a matching slot

    Open the desktop manual or the maker's spec page and look for a spare M.2 slot or a spare SATA port. An M.2 slot must match the drive's length, such as 2280, and its key, and the slot must support NVMe for an NVMe drive. A 2.5-inch drive needs a free SATA data port on the motherboard, a SATA power cable from the power supply and a bay or bracket to hold it. A USB enclosure or an adapter card also connects the drive to the desktop.

  3. Install an M.2 drive in the desktop

    Shut the desktop down, unplug it and follow the maker's manual for opening the case. Find the free M.2 slot, remove the small screw at its end, slide the drive in at a slight angle and press it flat, then fasten the screw. If the drive came with a heatsink, check that it clears nearby parts before you close the case. Plug the desktop back in and switch it on.

  4. Connect a 2.5-inch SATA drive

    Shut the desktop down, unplug it and follow the maker's manual for opening the case. Fix the drive in a free bay with screws or a bracket so it cannot move. Plug a SATA data cable from the drive to a free SATA port on the motherboard, then plug a SATA power cable from the power supply into the drive. Close the case, plug the desktop back in and switch it on.

  5. Use a USB enclosure instead

    A USB enclosure or dock lets you connect the drive without opening the desktop. Buy one that matches the drive's form factor, M.2 NVMe or 2.5-inch SATA, and follow the maker's instructions to fit the drive inside it. Plug the enclosure into a USB port on the desktop. The drive shows up as an external drive, so you can copy files off it or use it as extra storage.

  6. Check that the desktop sees the drive

    After you switch the desktop on, check that the drive appears in the system settings or disk management tool. If the drive already holds files you want, open it and copy them before you change anything. Do not format a drive that holds files you want to keep, since formatting erases everything on it. If the drive does not appear, switch the desktop off, unplug it and check that the drive is seated and every cable is fully plugged in.

What you need

Lexar 1TB NM790 NVMe SSD w/Heatsink

Lexar 1TB NM790 NVMe SSD w/Heatsink

A 1TB M.2 2280 NVMe drive with a heatsink, rated up to 7400 MB/s read, for a desktop M.2 slot.

View on Amazon
Samsung SSD 9100 PRO

Samsung SSD 9100 PRO

A 2TB PCIe 5.0 M.2 2280 NVMe drive rated up to 14,700 MB/s read, for a desktop with a PCIe 5.0 slot.

View on Amazon
TEAMGROUP T-Force Vulcan Z

TEAMGROUP T-Force Vulcan Z

A 1TB 2.5-inch SATA III drive with a 7mm slim design, rated up to 550 MB/s read, for a desktop SATA connection.

View on Amazon
Crucial P310 1TB SSD

Crucial P310 1TB SSD

A 1TB PCIe Gen4 NVMe M.2 2280 drive rated up to 7,100 MB/s read, for laptops, desktops and handheld consoles.

View on Amazon

These come from our ranked list Best Internal SSD for Laptop, which compares them spec by spec.

FAQ

Can I connect a laptop SSD to a desktop without opening the case?

Yes. Put the drive in a USB enclosure or dock that matches its form factor, M.2 NVMe or 2.5-inch SATA, then plug it into a USB port. The desktop sees it as an external drive, so you can copy files without touching the inside of the case.

Will a laptop M.2 SSD fit in a desktop?

It fits if the desktop motherboard has a free M.2 slot with the same key and length, such as M.2 2280, and supports NVMe. Check the motherboard manual for the slot's key, length and PCIe generation before you buy an adapter or install the drive.

Do I need to format the laptop SSD before using it in a desktop?

No, if you want to keep the files on it. Connect the drive and check that the desktop sees it, then copy the files you need. Format only a drive you plan to use as empty storage, since formatting erases everything on it.

Ranked internal ssds guides