How to Build a Liquid Cooled Gaming PC
Build a liquid cooled gaming PC by fitting an all-in-one (AIO) liquid cooler to the CPU, mounting its radiator and fans in the case, and connecting the pump and fan cables to the motherboard. An AIO moves heat from the CPU to the radiator, where fans push it out of the case. Check your case and motherboard socket against the cooler you pick before you buy.
Check the CPU socket and case space
Match the cooler to your CPU socket and to the space in your case. The ARCTIC Liquid Freezer III Pro 360 models fit LGA1851, LGA1700, AM4, and AM5, and the Thermalright Aqua Elite 120 V3 and 240 V3 fit AM4 and AM5 with Intel LGA1150, LGA1151, LGA1200, and LGA1700. A 360 radiator needs room for three 120mm fan mounts, a 240 radiator needs room for two, and a 120 radiator needs room for one. Measure the mounting area in your case and check the maker's manual before you buy.
Shut down, unplug, and fit the cooler
Shut the PC down and unplug it before you open the case, and follow the maker's manual for each step. Fit the contact frame or mounting hardware for your socket, then set the cold plate on the CPU with the offset mounting the ARCTIC models use to sit over the CPU hotspot. The ARCTIC Liquid Freezer III Pro 360 models add an integrated VRM fan that cools the voltage converters on the motherboard. Keep the radiator hoses clear of fans and sharp edges as you route them.
Mount the radiator and connect the cables
Mount the radiator where your case has fan mounts, then connect the pump and fan cables to the motherboard headers the manual names. The ARCTIC models route the radiator fan PWM cables inside the hose sheathing, so only a single visible cable runs to the motherboard. The Thermalright Aqua Elite 120 V3 and 240 V3 use dual 120mm ARGB fans with 4-pin PWM and 5V 3-pin ARGB connections that sync with the motherboard. Check each plug against the manual before you power the PC on.
Check temperatures and fan speed
After the build is on, open the monitoring page in your motherboard software or BIOS and watch the CPU temperature at idle and under load. The Thermalright fans adjust speed with CPU temperature through PWM, and the ARCTIC P12 PRO fans run at higher maximum speed under high load. If a fan does not spin or the pump makes an odd noise, shut the PC down, unplug it, and check the cables and mounts against the maker's manual.
What you need

ARCTIC Liquid Freezer III Pro 360 A-RGB
An AIO CPU cooler with A-RGB lighting, a VRM fan, offset mounting, and support for LGA1851, LGA1700, AM4, and AM5, with a 6-year warranty.
View on Amazon
ARCTIC Liquid Freezer III Pro 360
An AIO CPU cooler with 3 x 120mm fans, a VRM fan, offset mounting, and support for LGA1851, LGA1700, AM4, and AM5, with a 6-year warranty.
View on Amazon
Thermalright Aqua Elite 120 V3 AIO CPU Cooler
A 120mm AIO CPU cooler with dual ARGB fans, a fourth-generation pump head, and support for AM4 and AM5.
View on Amazon
Thermalright Aqua Elite 240 V3 Water Cooling CPU Cooler
A 240mm AIO CPU cooler with dual ARGB fans, a fourth-generation pump head, and support for AM4 and AM5.
View on AmazonThese come from our ranked list Best CPU Liquid Cooler, which compares them spec by spec.
FAQ
Do I need a custom loop to liquid cool a gaming PC?
No. The coolers here are all-in-one units with the pump, cold plate, radiator, and fans in one unit, so you fit the unit and connect its cables instead of building a loop. Check the maker's manual for your model before you start.
Which CPU sockets do these coolers fit?
The ARCTIC Liquid Freezer III Pro 360 models fit LGA1851, LGA1700, AM4, and AM5. The Thermalright Aqua Elite 120 V3 and 240 V3 fit AM4 and AM5 with Intel LGA1150, LGA1151, LGA1200, and LGA1700. Check your CPU socket against the cooler before you buy.
How do I know if the cooler is working?
Watch the CPU temperature in your motherboard software or BIOS at idle and under load, and check that the fans spin and the pump runs. If a fan does not spin, the pump makes an odd noise, or temperatures climb, shut the PC down, unplug it, and check the cables and mounts against the maker's manual.



