How to Add an SSD to a Motherboard
Adding an SSD to a motherboard means fitting the drive into a free bay and connecting it, then letting the computer see it. A 2.5-inch SATA drive needs a SATA data cable to a spare SATA port on the board and power from the power supply. The steps below cover the install, starting with the shutdown and the manual.
Shut down and open the case
Shut the computer down and unplug it from the wall before you open the case. Follow the maker's manual for your computer or motherboard to find the right panel and the SATA ports. Work on a clear desk and use an anti-static wrist strap clipped to a metal part of the case while you handle the drive.
Find a free SATA port and bay
Look for a spare SATA port on the motherboard and a free 2.5-inch bay in the case. If the free bay is larger than the drive, a bracket or an adapter tray holds the drive in place. Check the manual for which SATA ports are free and where the bays sit.
Mount the drive and connect the cables
Slide the drive into the bay and fix it with the screws that came with the case or the drive. Connect a SATA data cable from the drive to the spare SATA port on the motherboard, then connect a SATA power cable from the power supply to the drive. Push both plugs in until they sit flat and firm.
Check the drive shows up
Plug the computer back in and switch it on, then open the drive list in your operating system or the BIOS to check the new drive is listed. If it does not show, shut down, unplug and check both cables again. A new drive may need formatting before it stores files, so follow the prompts in your operating system.
What you need

PNY CS900 500GB 2.5" SATA III Internal
A 500 GB 2.5-inch SATA III drive with read speeds of up to 550 MB/s and a 3 Year warranty.
View on Amazon
SanDisk SSD Plus
A 500 GB 2.5-inch SATA III drive with read speeds of up to 545 MB/s, a 7mm form factor and a 3 Year Limited warranty.
View on Amazon
PNY CS900 250GB 2.5" SATA III Internal
A 250 GB 2.5-inch SATA III drive with read speeds of up to 535 MB/s and a 3 Year warranty.
View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD
A 960 GB 2.5-inch SATA3 drive for a hard drive replacement, with a Limited 3 Year warranty.
View on AmazonThese come from our ranked list Best Internal SATA SSD, which compares them spec by spec.
FAQ
Do I need a SATA cable for a 2.5-inch SSD?
Yes. A 2.5-inch SATA drive needs a SATA data cable to the motherboard and a SATA power cable from the power supply. Some drives ship with no cables, so check what comes in the box before you start.
Can I add an SSD without removing the old drive?
Yes, if the motherboard has a spare SATA port and the case has a free bay. The old drive stays in place, and the new SSD works beside it once both cables are connected and the computer sees it.
Why does my new SSD not show up?
Check that both cables are pushed in at each end and that the drive is mounted in its bay. Open the drive list in your operating system or the BIOS, and if it still does not show, shut down, unplug and check the cables again.




