Amazon Black Friday Week deals

Paid link

Storage · How-to guide

How to Add New Storage to a PC

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To add storage to a PC, install a second internal SSD in a spare drive bay and connect it with SATA data and power cables. Shut the PC down and unplug it first, then mount the drive, connect the cables and format the new drive in your system's disk tool. The four drives here are 2.5-inch SATA drives in 250GB, 500GB and 960GB capacities.

  1. Pick a drive that fits your PC

    Check your PC's manual for a spare SATA port, a SATA power cable and an empty 2.5-inch drive bay before you buy. The PNY CS900 comes as a 250GB drive and a 500GB drive, the SanDisk SSD Plus comes as a 500GB drive, and the Kingston A400 comes as a 960GB drive. Pick the capacity from the space your files and apps take now, and check the drive size against the bay in your PC.

  2. Shut down and unplug the PC

    Shut the PC down and unplug it from the wall before you open the case. Follow the steps in your PC's manual to take off the side panel, and do not open a PC that is still under warranty without checking with the maker first. Keep the screws from the panel in one place so they are easy to find when you close the case.

  3. Mount the drive and connect the cables

    Slide the 2.5-inch drive into the empty bay and fix it with the screws from the bay or the drive box. Plug a SATA data cable into the back of the drive and into a spare SATA port on the motherboard. Plug a SATA power cable from the power supply into the drive. Push each plug in until it sits flat, and check that no cable presses against a fan.

  4. Format the new drive

    Put the side panel back on, plug the PC in and switch it on. Open your system's disk tool and look for the new drive in the list of disks. Format it, give it a drive letter if your system asks for one, and wait for the format to finish before you move files onto it.

  5. Move files to the new drive

    Once the drive is formatted, it shows up with the rest of your storage. Move files, photos and videos onto it to free space on your old drive, or install new apps there. Check the drive's remaining space from time to time, and move files off it if it fills up.

What you need

PNY CS900 500GB 2.5" SATA III Internal

PNY CS900 500GB 2.5" SATA III Internal

A 500GB 2.5-inch SATA III SSD with read speeds of up to 550MB/s and write speeds of up to 500MB/s, backed by a 3-year warranty.

View on Amazon
SanDisk SSD Plus

SanDisk SSD Plus

A 500GB 2.5-inch 7mm SATA III 6 Gb/s SSD with read speeds of up to 545MB/s, backed by a 3-year limited warranty.

View on Amazon
PNY CS900 250GB 2.5" SATA III Internal

PNY CS900 250GB 2.5" SATA III Internal

A 250GB 2.5-inch SATA III SSD with read speeds of up to 535MB/s and write speeds of up to 500MB/s, backed by a 3-year warranty.

View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD

Kingston 960GB A400 SATA3 2.5" Internal SSD

A 960GB 2.5-inch SATA3 SSD for replacing a hard drive, with a limited 3-year warranty.

View on Amazon

These come from our ranked list Best Internal SATA SSD, which compares them spec by spec.

FAQ

Can I add an SSD without removing the old drive?

Yes, if your PC has a spare SATA port and a free drive bay. The new drive sits beside the old one, and you keep the old drive for the system or for files.

Do I need to format the new drive?

Yes. A new drive needs a file system from formatting before it shows up for files. Format it in your system's disk tool after you install it.

Which SSD should I pick for my PC?

Match the drive to a spare SATA port and an empty 2.5-inch bay in your PC, then pick the capacity from the space your files take now. The PNY CS900 comes as a 250GB drive and a 500GB drive, the SanDisk SSD Plus comes as a 500GB drive, and the Kingston A400 comes as a 960GB drive.

Ranked internal ssds guides