How to Add Another Drive to a PC
To add another drive to a PC, fit a second internal drive such as a 2.5-inch SATA SSD into a free bay, connect it to a spare SATA port and power cable, then format it in your operating system so it shows up as a new drive letter. Shut the PC down and unplug it before you open the case, and follow the maker's manual for your model.
Check for a free drive bay and SATA port
Open the maker's manual for your PC and look for a free 2.5-inch bay, a spare SATA port on the motherboard and a spare power connector from the power supply. Check the manual before you buy the drive, so you know the bay, port and connector are there. Note which SATA port is free and where the power cable reaches.
Shut down, unplug and open the case
Shut the PC down and unplug it from the wall before you open the case, and follow the maker's manual for your model. Touch a metal part of the case first to discharge static, then remove the side panel with the screws or latch the manual shows. Keep the screws with the side panel while you work.
Mount the drive and connect the cables
Slide the 2.5-inch SSD into the free bay and secure it in place. Connect a SATA data cable from the drive to the spare SATA port, then connect a SATA power cable from the power supply to the drive. Push both connectors in until they sit flat, then close the case and plug the PC back in.
Format the new drive
Start the PC and open your operating system's disk management tool. The new drive appears as unallocated space, so create a volume on it and format it to make it usable. Give it a drive letter and a name you will recognize, then check that it shows up in your file manager before you move files onto it.
What you need

PNY CS900 500GB 2.5" SATA III Internal
A 500GB 2.5-inch SATA III SSD with read speeds of up to 550MB/s and write speeds of up to 500MB/s, backed by a 3-year warranty.
View on Amazon
SanDisk SSD Plus
A 500GB 2.5-inch, 7mm SATA III 6 Gb/s SSD with read speeds of up to 545MB/s, a shock-resistant design and a 3-year limited warranty.
View on Amazon
PNY CS900 250GB 2.5" SATA III Internal
A 250GB 2.5-inch SATA III SSD with read speeds of up to 535MB/s and write speeds of up to 500MB/s, backed by a 3-year warranty.
View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD
A 960GB 2.5-inch SATA3 SSD for replacing a hard drive, with fast start up, loading and file transfers and a limited 3-year warranty.
View on AmazonThese come from our ranked list Best Internal SATA SSD, which compares them spec by spec.
FAQ
Can I add a second drive without removing the old one?
Yes, if your PC has a free 2.5-inch bay, a spare SATA port and a spare power connector. The new drive works alongside the old one once it is formatted.
Does a SATA SSD work in any desktop PC?
A 2.5-inch SATA III drive fits any PC with a free 2.5-inch bay and a spare SATA port. The PNY CS900 drives are also backwards compatible with SATA II at 3GB/sec, so an older port still works.
What size drive should I add?
Pick a capacity that fits what you store. The drives here run from 250 GB to 960 GB: the PNY CS900 250GB suits a small library, while the Kingston A400 960GB holds far more.




