How Do SSDs Connect to a Motherboard?
An SSD connects to a motherboard through a SATA cable and a power cable, or by sliding into an M.2 slot on the board. A 2.5-inch SATA drive like the ones below uses a data cable and a power cable, while an M.2 drive plugs straight into its slot and needs no cables at all. Check which connectors your board has before you buy a drive.
Check which SSD your board takes
Motherboards take SATA drives and M.2 drives. A 2.5-inch SATA drive sits in a drive bay and connects with cables, while an M.2 drive plugs into a slot on the board itself. Look at your board or its manual to see which slots and bays it has. An M.2 slot may take a SATA drive, an NVMe drive, or either type, so check what each slot accepts before you choose a drive.
Connect a 2.5-inch SATA drive
Shut the computer down, unplug it, and follow the manual for your board, then mount the drive in a free bay and fix it with screws. Plug a SATA data cable into the drive and into a SATA port on the motherboard. Plug a SATA power cable from the power supply into the drive. The drive needs a data cable and a power cable to run. A SATA data cable has an L-shaped plug, and the power plug is wider, so each plug fits its own socket.
Fit an M.2 drive in its slot
Shut the computer down, unplug it, and follow the manual for your board. Find the M.2 slot, remove its screw, and slide the drive in at a slight angle. Press the drive down flat and refit the screw so the drive stays put. A drive that sits loose in the slot may not show up when the computer starts.
Check the drive is seen and ready
Start the computer and look in the BIOS or UEFI setup to see if the drive is listed. If the drive is new, it may need to be set up in your operating system before it holds files. Open your disk tools, give the drive a format, and check that its full size shows before you move files onto it.
What you need

PNY CS900 500GB 2.5" SATA III Internal
A 500 GB 2.5-inch SATA III drive with rated read speeds up to 550 MB/s and a 3-year warranty.
View on Amazon
SanDisk SSD Plus
A 500 GB 2.5-inch SATA III 6 Gb/s drive with read speeds up to 545 MB/s and a 3-year limited warranty.
View on Amazon
PNY CS900 250GB 2.5" SATA III Internal
A 250 GB 2.5-inch SATA III drive with rated read speeds up to 535 MB/s and a 3-year warranty.
View on Amazon
Kingston 960GB A400 SATA3 2.5" Internal SSD
A 960 GB 2.5-inch SATA3 drive with a limited 3-year warranty.
View on AmazonThese come from our ranked list Best Internal SATA SSD, which compares them spec by spec.
FAQ
Does a SATA SSD need a power cable?
Yes. A 2.5-inch SATA drive needs a SATA data cable to the motherboard and a SATA power cable from the power supply. A data cable alone does not run the drive.
Can I plug an M.2 SSD into any M.2 slot?
No. Some M.2 slots take SATA drives, some take NVMe drives, and some take both. Check your motherboard manual for what each slot accepts before you buy a drive.
Do I need a cable for an M.2 SSD?
No. An M.2 drive plugs straight into its slot on the motherboard and is held by a small screw. It takes no data or power cable.




