What Are GPU Risers?
A GPU riser is a cable or rigid adapter that extends the motherboard's PCIe slot so the graphics card can mount away from the slot, often upright in a vertical mount. The card still talks to the motherboard through the riser, so the same card works in a different position in the case.
What a GPU riser is
A riser is a cable or a rigid adapter that plugs into the PCIe slot on the motherboard and gives the graphics card a slot of its own, away from the board. The card plugs into the riser instead of the motherboard, and the riser carries the PCIe link between them. Builders use one to mount a card upright in a vertical mount, or to place it where the motherboard slot cannot reach.
Why builders use one
One reason is the look: a card mounted upright shows its fans through the case window instead of facing down. A riser also helps in a small case, where the motherboard slot sits too close to the side panel for a thick card. The ASUS cards here are 2.5-slot, so they need that extra room.
Cable risers and rigid risers
A cable riser is a flexible flat cable that bends around the case, while a rigid riser is a short board that holds the card at a fixed angle. Match the riser to the card: the ASUS cards here list PCIe 5.0, so check the riser lists the same generation. A riser that lists an older generation still fits, but check the maker's notes before you buy.
How to fit a riser
Shut the computer down, unplug it and follow the maker's manual for your case and card. Plug the riser into the motherboard slot, seat the graphics card fully in the riser and fix its bracket to the case. Route the cable without sharp bends, then switch the computer on and check the card shows in the system.
What to check before you buy
Check the case has a vertical mount bracket and room for the card's thickness, and check the riser lists the same PCIe generation as the card. The ASUS cards here are 2.5-slot, the MSI card is low profile and the NVIDIA card is a dual-slot low-profile board. Measure the space in your case against the card before you order.
What you need

ASUS PRIME GeForce RTX 5060 Ti 16GB
A 16GB GDDR7 card with PCIe 5.0, HDMI, a 2.5-slot design and dual BIOS for a vertical mount.
View on Amazon
ASUS Prime GeForce RTX 5060 Ti 8GB
An 8GB GDDR7 card with PCIe 5.0, HDMI, a 2.5-slot design and dual BIOS for a vertical mount.
View on Amazon
MSI Gaming RTX 3050 LP 6G OC Graphics Card
A low-profile 6GB GDDR6 card with HDMI 2.1a and DisplayPort for a small case with a riser.
View on Amazon
NVIDIA RTX 4000 SFF Ada Generation Workstation Ada Lovelace Architecture Dual Slot Low Profile Professional Graphics Board 900-5G192-2571-000 VD8465
A dual-slot low-profile workstation card for a small-form-factor build with a riser.
View on AmazonThese come from our ranked list Best Sff GPU, which compares them spec by spec.
FAQ
Does a riser slow down a graphics card?
A riser rated for the same PCIe generation as the card keeps the link the card expects. The ASUS cards here list PCIe 5.0, so check the riser lists PCIe 5.0 too before you buy.
Can any graphics card use a riser?
Any card with a PCIe connector can mount on a riser, but check the case has a bracket for the card and room for its thickness. The ASUS cards here are 2.5-slot, and the MSI and NVIDIA cards are low profile.
Do I need to change settings after fitting a riser?
No. Shut the computer down and unplug it before you fit the riser, seat the card fully and fix its bracket, then switch the computer on and check the card shows in the system. Follow the maker's manual for your case and card.




