Amazon Black Friday Week deals

Paid link

Graphics Cards · How-to guide

How to Install a New Graphics Card

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To install a new graphics card, shut the PC down, unplug it, open the case, remove the old card if there is one, seat the new card in the PCIe slot, connect its power cables, close the case and install the drivers. The whole job needs a screwdriver and the driver package from the card maker's site.

  1. Shut down and open the case

    Shut the PC down, unplug the power cable and press the power button once to drain leftover charge. Open the side panel with a screwdriver and follow the maker's manual for your case. Touch a metal part of the case before you handle parts inside, and keep the new card in its anti-static bag until you are ready to fit it.

  2. Check the fit and the power cables

    Check that the new card fits the case: compare the card length and the slot width with the space inside, and check that the PCIe slot is free. Find the power cables from the power supply and check that they match the connectors on the card. If the card has power connectors, plug in each one and check that it clicks into place.

  3. Remove the old card

    If a card is already fitted, unplug its power cables and remove the screw or screws that hold its bracket to the case. Press the small latch at the end of the PCIe slot, then lift the card straight out. Put the old card in an anti-static bag and keep its screws together.

  4. Seat the new card

    Line the card up with the PCIe slot and the opening at the back of the case, then press it down firmly until the latch clicks. Fix the bracket to the case with the screw or screws you removed. Connect the power cables from the power supply to the connectors on the card, and check that each one is fully seated.

  5. Connect the monitor and install drivers

    Close the case and plug the monitor cable into the new card, not the motherboard. Plug the power cable back in, switch the PC on and install the driver package from the card maker's site. Restart the PC when the installer asks, then open the display settings and check that the monitor runs at the resolution and refresh rate you want.

  6. If the screen stays blank

    If nothing shows on the monitor, shut the PC down and unplug it again. Reseat the card in the PCIe slot, check each power cable and check that the monitor cable is in the new card. If the screen is still blank, contact the card maker for help and do not open the power supply.

What you need

PNY NVIDIA GeForce RTX 5070 Ti OC

PNY NVIDIA GeForce RTX 5070 Ti OC

A triple-fan card with 16GB GDDR7 memory, an HDMI output, PCIe 5.0 and a 3-year limited warranty.

View on Amazon
PowerColor Reaper

PowerColor Reaper

A 16GB GDDR6 card with two 8-pin power connectors, a 750W minimum system power figure and a 289 mm card length.

View on Amazon
ASUS Dual

ASUS Dual

A dual-fan card with 8GB GDDR7 memory, HDMI 2.1b and DisplayPort 2.1b outputs, a 2.5-slot design and dual BIOS.

View on Amazon
GIGABYTE GeForce RTX 3050 WINDFORCE OC V2

GIGABYTE GeForce RTX 3050 WINDFORCE OC V2

A dual-fan card with 6GB GDDR6 memory on a 96-bit interface, and a 3-year manufacturer warranty.

View on Amazon

These come from our ranked list Best New Graphics Cards, which compares them spec by spec.

FAQ

Do I need to remove the old graphics card?

Yes, if a card is already fitted. Unplug its power cables, remove the bracket screws, press the latch at the end of the PCIe slot and lift the card straight out before you fit the new one.

Where do I plug in the monitor cable?

Plug the monitor cable into the new graphics card, not the motherboard. Use the cable that matches a port on the card and the port on your monitor.

What if the PC does not show a picture after the install?

Shut the PC down and unplug it, then reseat the card, check each power cable and check that the monitor cable is in the new card. If the screen is still blank, contact the card maker for help.

Do I need to install drivers for a new graphics card?

Yes. After the card is fitted and the PC is switched on, install the driver package from the card maker's site and restart the PC when the installer asks.

Ranked graphics cards guides