Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

Standard PC Case Sizes Explained

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

There is no single standard PC case size. Cases are described by the motherboard they fit, such as Mini-ITX or mATX, and by their volume in liters. The cases on this page run from 10.4 liters to 26.3 liters, so check the motherboard form factor first, then the GPU length and radiator support, then the space on your desk.

  1. Start with the motherboard form factor

    The motherboard decides the case size more than anything else. The A4-H2O, Terra and NR200P V3 on this page fit Mini-ITX boards only. The A3 fits mATX boards as well as ITX boards, with 4 expansion slots. Check the form factor printed on your board, then look for a case that lists it.

  2. Check GPU length and slots

    Measure your graphics card, then compare it with the case figure. The A3 fits GPUs up to 415mm, the NR200P V3 fits GPUs up to 361.5mm in a vertical mount, and the Terra fits GPUs up to 322mm. The A4-H2O takes a triple-slot GPU mounted behind the motherboard on a PCIe 5.0 riser cable. A card longer than the case figure does not fit.

  3. Check radiator and cooling support

    Cooling support is a second size to check. The A3 holds a 360mm radiator and up to 10 120mm fans. The A4-H2O holds a 240mm AIO, and the NR200P V3 holds 240mm and 280mm radiators. Mesh panels on the A3 and the A4-H2O help air move through the case. Check the radiator size against the case figure before you buy.

  4. Check the power supply and desk space

    Power supply size varies by case, so check what each case takes. The A3 takes ATX, SFX and SFX-L power supplies, the A4-H2O takes SFX and SFX-L, and the NR200P V3 takes SFX power supplies up to 130mm long. Then measure the desk: the cases on this page run from 10.4 liters for the Terra to 26.3 liters for the A3. Shut the PC down and unplug it before you move parts between cases.

What you need

Lian Li A3-mATX PC Case

Lian Li A3-mATX PC Case

A 26.3-liter case for mATX and ITX motherboards, with room for GPUs up to 415mm, a 360mm radiator and 4 expansion slots.

View on Amazon
Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5

Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5

An 11-liter Mini-ITX case with a triple-slot GPU mount, a PCIe 5.0 riser cable and support for a 240mm AIO.

View on Amazon
Fractal Design Terra Jade

Fractal Design Terra Jade

A 10.4-liter Mini-ITX case with room for a GPU up to 322mm, a USB Type-C port and a walnut front panel.

View on Amazon
Cooler Master NR200P V3 Mini-ITX PC Case

Cooler Master NR200P V3 Mini-ITX PC Case

An 18.6-liter Mini-ITX case with vertical GPU mounting for GPUs up to 361.5mm, a PCIe 5.0 riser and 280mm radiator support.

View on Amazon

These come from our ranked list Best ITX Case, which compares them spec by spec.

FAQ

What does Mini-ITX mean for a PC case?

Mini-ITX is a small motherboard form factor, and a Mini-ITX case is built around it. The A4-H2O, Terra and NR200P V3 on this page fit Mini-ITX motherboards, while the A3 also fits mATX boards.

How do I know if my graphics card fits?

Compare the card length with the case figure. The A3 fits GPUs up to 415mm, the NR200P V3 up to 361.5mm and the Terra up to 322mm. Check the card length in the maker's manual for your card.

What size power supply does a small case take?

It depends on the case. The A3 takes ATX, SFX and SFX-L power supplies, the A4-H2O takes SFX and SFX-L, and the NR200P V3 takes SFX power supplies up to 130mm long. Check the case manual before you buy a power supply.

Ranked pc cases guides