Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

PC Tower Types Explained

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

PC towers come in full tower, mid tower, mini tower and small form factor sizes. The size decides which motherboard form factor fits inside and how much room there is for cooling and parts. Full towers fit E-ATX boards, mid towers fit ATX boards, and smaller cases fit smaller boards, so match the case to the board and the parts you plan to install.

  1. Full tower cases

    A full tower is a large desktop case size. It fits E-ATX motherboards and leaves room for large radiators and extra fans. The Antec Flux Pro full tower supports a 420mm radiator and a 360mm radiator at the same time, with room for up to 12 fans, and its power supply mounts at a 90° angle. The Antec Performance 1 FT is also a full tower E-ATX case with a mesh front panel and a temperature display. A full tower takes up the most desk or floor space, so measure the spot where it will sit before you buy.

  2. Mid tower cases

    A mid tower is the common desktop case size and fits ATX motherboards. It holds a full-size graphics card and standard cooling while taking up less room than a full tower. The HYTE Y70 Touch Infinite is a dual chamber ATX chassis with room for up to 10 fans and a 360mm radiator on the side, plus a PCIe 4.0 riser for vertical graphics card mounting. It also has a 14.9” integrated LCD touchscreen with 2.5K resolution and a 60Hz refresh rate. If your parts list fits in a mid tower, there is no need to move up to a full tower.

  3. Mini tower and small cases

    A mini tower is shorter than a mid tower and fits smaller motherboards. Small form factor cases are smaller still and suit compact builds that use fewer parts. With less room inside, check that your graphics card, cooler and power supply fit the case dimensions in the maker's manual. Smaller cases can also run warmer because there is less room for fans and airflow, so plan the cooling layout before you buy.

  4. Match the case to your parts

    Start with the motherboard form factor, then check the graphics card, cooler and power supply against the case. The HYTE Y70 Touch Infinite supports 4 slot vertical graphics with an included PCIe 4.0 riser cable. The Antec Flux Pro shows CPU and GPU temperatures on a display, and the Antec Performance 1 FT has a Type-C 10Gbps port and dual 4mm tempered glass side panels. Check the ports on the front panel too, and confirm the case fits the space where it will sit.

What you need

HYTE Y70 Touch Infinite Modern Aesthetic Gaming PC Case

HYTE Y70 Touch Infinite Modern Aesthetic Gaming PC Case

A dual chamber ATX chassis with a 14.9” 2.5K LCD touchscreen, room for up to 10 fans, a 360mm side radiator and an included PCIe 4.0 riser cable.

View on Amazon
Antec Flux Pro Full-Tower E-ATX PC Case

Antec Flux Pro Full-Tower E-ATX PC Case

A full-tower E-ATX case with 6 PWM fans included, a walnut wood front panel, a 90° rotated PSU mount and support for a 420mm radiator plus a 360mm radiator.

View on Amazon
HYTE Y70 Touch Infinite Modern Aesthetic Gaming PC Case

HYTE Y70 Touch Infinite Modern Aesthetic Gaming PC Case

A dual chamber ATX chassis in pitch black with a 14.9” 2.5K LCD touchscreen, room for up to 10 fans and a 360mm side radiator.

View on Amazon
Antec Performance 1 FT Full Tower E-ATX PC Case

Antec Performance 1 FT Full Tower E-ATX PC Case

A full tower E-ATX case with a high-airflow mesh front panel, a temperature display, dual 4mm tempered glass side panels and a Type-C 10Gbps port.

View on Amazon

These come from our ranked list Best PC Tower Case, which compares them spec by spec.

FAQ

What tower size should I buy for an ATX motherboard?

A mid tower or a full tower fits an ATX motherboard. Pick a full tower when you want room for large radiators and extra fans, and a mid tower when the parts list is shorter and desk space matters.

Can a full tower case fit a smaller motherboard?

Yes. A full tower that fits E-ATX boards also has mounting points for smaller boards, so an ATX or smaller board fits inside. Check the case manual for the supported form factors before you buy.

Does a bigger tower keep parts cooler?

A larger case gives more room for fans and radiators, which helps airflow, but cooling also depends on fan placement and the parts inside. Check the radiator and fan support listed for the case and plan the layout before you buy.

Ranked pc cases guides