Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

PC Form Factor Sizes Explained

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A PC form factor is the size standard a case and a motherboard share. The common small sizes are mATX and Mini-ITX: mATX cases fit mATX and Mini-ITX boards, while Mini-ITX cases fit Mini-ITX boards only. The cases shown here run from 10.4 liters to 26.3 liters, and the smaller the volume, the tighter the fit for graphics cards and cooling.

  1. What form factor means

    Form factor names the size standard for the motherboard and the case that holds it. A case lists the board sizes it takes: the Lian Li A3 takes mATX and ITX boards, while the Lian Li A4-H2O, the Fractal Design Terra and the Cooler Master NR200P V3 take Mini-ITX boards. Match the case to the board you own, or pick the board after you pick the case. A board that is larger than the case takes will not fit.

  2. Volume in liters tells the size

    Case size is often given in liters, and the figure lets you compare cases at a glance. The Fractal Design Terra is 10.4 liters, the Lian Li A4-H2O is 11 liters, the Cooler Master NR200P V3 is 18.6 liters, and the Lian Li A3 is 26.3 liters. A smaller volume means less room inside, so check the graphics card length and radiator size the case gives before you buy.

  3. Check graphics card and cooler fit

    A small case still holds a long graphics card, but the limit differs by model. The Lian Li A3 fits graphics cards up to 415 mm and a 360 mm radiator, the Cooler Master NR200P V3 fits cards up to 361.5 mm and radiators up to 280 mm, and the Fractal Design Terra fits cards up to 322 mm. The Lian Li A4-H2O fits a triple-slot card and a 240 mm AIO. Measure your card and cooler, then compare them with the figures the case gives.

  4. Power supply and riser cables

    Small cases use small power supplies, and some mount the graphics card on a riser cable. The Lian Li A3 takes ATX, SFX and SFX-L power supplies, the Lian Li A4-H2O takes SFX and SFX-L supplies, and the Cooler Master NR200P V3 takes SFX supplies up to 130 mm long. The Lian Li A4-H2O and the Cooler Master NR200P V3 come with a PCIe 5.0 riser cable, and the Fractal Design Terra comes with a PCIe 4.0 riser cable.

What you need

Lian Li A3-mATX PC Case

Lian Li A3-mATX PC Case

An mATX case at 26.3 liters that fits mATX and ITX boards, graphics cards up to 415 mm and a 360 mm radiator.

View on Amazon
Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5

Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5

A Mini-ITX case at 11 liters with a triple-slot graphics card mount, a 240 mm AIO and a PCIe 5.0 riser cable.

View on Amazon
Fractal Design Terra Jade

Fractal Design Terra Jade

A Mini-ITX case at 10.4 liters with a walnut front panel, a USB-C port and room for graphics cards up to 322 mm.

View on Amazon
Cooler Master NR200P V3 Mini-ITX PC Case

Cooler Master NR200P V3 Mini-ITX PC Case

A Mini-ITX case at 18.6 liters with vertical graphics card mounting, a PCIe 5.0 riser and radiators up to 280 mm.

View on Amazon

These come from our ranked list Best ITX Case, which compares them spec by spec.

FAQ

What is the difference between mATX and Mini-ITX?

mATX is the larger of the two sizes, and a case made for mATX boards also fits Mini-ITX boards. A Mini-ITX case fits Mini-ITX boards only, so check the board size the case gives.

How small is a Mini-ITX case?

The Mini-ITX cases shown here run from 10.4 liters to 18.6 liters. The Fractal Design Terra is 10.4 liters, the Lian Li A4-H2O is 11 liters, and the Cooler Master NR200P V3 is 18.6 liters.

Will a long graphics card fit a small case?

It depends on the case. The Lian Li A3 fits cards up to 415 mm, the Cooler Master NR200P V3 fits cards up to 361.5 mm, and the Fractal Design Terra fits cards up to 322 mm.

Ranked pc cases guides