Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

PC Fan Screw Size Guide

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

There is no one screw size for a PC fan. The size depends on the fan and the case it mounts in, so check the manual for your fan and your case for the screw size they list. Use the screws that came with the fan or the case, since those match the mounting holes for that hardware.

  1. Check the fan and case manuals

    Shut the PC down and unplug it before you open the case, and follow the manual for your PC. The manual for the fan and the manual for the case list the screw size for the mounting holes on that fan and that case. If the manuals give different sizes, use the size listed for the fan, since the screw threads into the fan frame. Keep the manual close while you work, so you can check the size again before you buy or fit a screw.

  2. Measure the mounting holes

    Hold the fan against the mounting point in the case and line up the holes in the fan frame with the holes in the case. The screw must pass through the case hole and thread into the fan frame without forcing it. If the screw slides through the fan hole without catching, it is too small for that fan. If it will not start by hand, it is too large, so stop and check the manual again for the size that fan uses.

  3. Use the screws that came with the fan

    Fans and cases often come with screws in the box, and those screws match the holes on that fan and that case. Use those screws first before you buy a new set. If you lost them, take the fan and the case manual to the shop, or order the size the manual lists, so the new screws match the holes you need to fill. Do not mix screws from different fans, since a screw that fits one fan may not fit the next one.

  4. Fit the screw by hand first

    Place the fan in the case and start one screw by hand, turning it until the thread catches. Tighten one screw a little at a time, moving across the fan so the fan sits flat against the mounting point. Stop when the fan is held firm and the screw head sits flat. If a screw keeps turning without holding, remove it and check the manual for the size that fan uses, since a screw that is too small will not hold the fan in place.

What you need

Lian Li A3-mATX PC Case

Lian Li A3-mATX PC Case

An mATX case that supports a 360mm radiator and up to 10 x 120mm fans, with room for GPUs up to 415mm.

View on Amazon
Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5

Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5

A Mini-ITX case in an 11-liter design that supports a 240mm AIO and a triple-slot GPU mounted with a PCIe 5.0 riser cable.

View on Amazon
Fractal Design Terra Jade

Fractal Design Terra Jade

A Mini ITX case in a 10.4 L design with a walnut front panel, room for a GPU up to 322 mm in length, and a USB Type-C port.

View on Amazon
Cooler Master NR200P V3 Mini-ITX PC Case

Cooler Master NR200P V3 Mini-ITX PC Case

A Mini-ITX case with support for a 280mm AIO radiator and a GPU up to 361.5mm, with an SFX PSU and a PCIe 5.0 riser cable.

View on Amazon

These come from our ranked list Best ITX Case, which compares them spec by spec.

FAQ

What screw size do PC fans use?

There is no one size. The size depends on the fan and the case, so check the manual for your fan and your case, and use the screws that came with them.

Can I use any screw to mount a PC fan?

No. A screw that is too small will not hold the fan, and a screw that is too large can damage the mounting holes. Use the size the fan manual lists, or the screws that came with the fan.

Where do I find the screw size for my fan?

Check the manual that came with the fan and the manual that came with the case. The fan maker and the case maker list the screw size for their own mounting holes, so those manuals are the source to trust.

Ranked pc cases guides