Amazon Black Friday Week deals

Paid link

Docks · How-to guide

How to Use Three Monitors with a Laptop

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To use 3 monitors with a laptop, connect a USB-C docking station to a laptop port that supports video output, then connect three monitors to the dock's HDMI or DisplayPort outputs and set the displays to extend in your display settings. The docks below each offer 100 W power delivery, so one cable carries charging and USB devices along with the video.

  1. Check which ports your laptop has

    A USB-C port on a laptop does not always carry video. Look in your laptop manual or spec sheet for DisplayPort Alt Mode, Thunderbolt, or USB4 on that port, and check that the port supports video output. If the port only carries data, monitors attached to the dock stay blank even though the USB ports work. Start with that check before you buy a dock or cables.

  2. Count the monitors and their inputs

    Count the three monitors you want to use and note which inputs each one has, HDMI or DisplayPort. Then match them to the dock's video outputs and the resolution and refresh rate the dock gives for each output. The Plugable UD-3900PDZ gives 4K at 30 Hz on one HDMI output and 1080p at 60 Hz on the other two, while the WAVLINK dock gives 4K at 60 Hz on HDMI and 2K at 60 Hz on the other two outputs. The Dell dock supports up to four displays.

  3. Connect the dock and the monitors

    Plug the dock into the laptop with its USB-C cable and plug the dock power adapter into the wall, so the dock can pass 100 W of power to the laptop. Connect each monitor to the dock with an HDMI or DisplayPort cable, using the output that gives the resolution and refresh rate you want for that monitor. Connect a keyboard and mouse to the dock USB ports, and connect an Ethernet cable to the dock if you want a wired network.

  4. Check the DisplayLink driver

    Some docks need a DisplayLink driver before the extra monitors work, and the need depends on the laptop. The Plugable UD-ULTCDL needs a DisplayLink driver on Mac for its second and third HDMI outputs, and the WAVLINK dock needs a DisplayLink driver on MacBook M1 to M5 models. The Plugable UD-3900PDZ also uses DisplayLink graphics for its extra displays. Install the driver the dock maker gives, then restart the laptop if the maker asks for that step.

  5. Arrange the displays in settings

    Open the display settings on your laptop and set the three monitors to extend the desktop, so each monitor shows a different part of the screen. Drag the monitor icons into the same left-to-right order as the monitors sit on your desk. Set the resolution for each monitor to the figure the dock gives for that output, and check that each monitor shows its own picture before you start work.

What you need

Dell Pro Laptop Docking Station WD25

Dell Pro Laptop Docking Station WD25

A USB-C dock with HDMI, DisplayPort, Ethernet and 100 W power delivery, with support for up to four displays.

View on Amazon
Plugable USB C Triple Display Docking Station

Plugable USB C Triple Display Docking Station

A USB-C dock with three HDMI outputs, 100 W power delivery and Ethernet, with 4K at 30 Hz on one monitor and 1080p at 60 Hz on two.

View on Amazon
Plugable USB-C Triple Monitor Docking Station

Plugable USB-C Triple Monitor Docking Station

A 13-in-1 USB-C dock with three HDMI outputs, 100 W laptop charging, a 20 W USB-C port, Gigabit Ethernet and an SD card reader.

View on Amazon
WAVLINK Displaylink Docking Station 3 Monitors for Mac(M1-M5/Neo) &

WAVLINK Displaylink Docking Station 3 Monitors for Mac(M1-M5/Neo) &

A USB-C dock with three HDMI and two DisplayPort outputs, 100 W power delivery and 6 USB ports at 10 Gbps, with 4K at 60 Hz on one monitor.

View on Amazon

These come from our ranked list Best Docking Station for 3 Monitors, which compares them spec by spec.

FAQ

Do I need a dock to use three monitors with a laptop?

A dock helps when your laptop does not have three video outputs of its own. Each dock below supports several displays, so one dock can run three monitors through a single USB-C connection to the laptop.

Will these docks work with a MacBook?

The two Plugable docks name macOS support, with a DisplayLink driver needed on Mac for the extra monitors on the UD-ULTCDL. The WAVLINK dock names MacBook M1 to M5 models and needs a DisplayLink driver on those MacBook models. Check the dock notes for your model and install the driver the dock maker gives before you connect the monitors.

Does the dock charge the laptop?

Each of the four docks below offers 100 W power delivery through USB-C, so the same cable that runs the monitors also charges the laptop. Check that your laptop supports USB-C charging before you rely on the dock for power.

Ranked docking stations guides