How to Mount PC Case Fans
To mount PC case fans, check the fan mounts in your case, set each fan to intake or exhaust, screw it to the panel and plug its cable into the motherboard. The Lian Li A3-mATX takes up to 10 120mm fans and a 360mm radiator, so check the mounts and the radiator support your case lists before you buy fans.
Check where the fans fit
Open the case and look at the fan mounts on the front, top, rear and bottom panels. The Lian Li A3-mATX lists mounts for up to 10 120mm fans and a 360mm radiator, while the Cooler Master NR200P V3 lists top mounts for 240mm or 280mm radiators. Compare the mounts in your case with the fans you own, and check the manual for the sizes each mount takes before you buy more.
Set the airflow direction
Decide whether each fan pulls air in or pushes it out before you screw it down. Front and bottom fans pull cool air in, while rear and top fans push warm air out. Fans mark the airflow direction with arrows on the frame, so mount each fan with the arrows pointing the way you want the air to move, and keep the cables on the side that faces the motherboard tray.
Screw the fans to the panel
Hold the fan against the mount with the screw holes lined up, then drive a screw in partway before you add the rest. Tighten the screws in turn until the fan sits flat against the panel, but stop before the frame bends. On a case with mesh panels, like the Lian Li A3-mATX or the Cooler Master NR200P V3, the mesh lets air through while the screws hold the fan in place.
Plug in the fan cables
Route each fan cable to the motherboard fan header or to a fan hub, and keep the cables clear of the fan blades. Shut the PC down and unplug it before you open the case or touch any cable inside. After the fans are mounted and plugged in, close the panels and power the PC on to check that each fan spins.
What you need

Lian Li A3-mATX PC Case
A compact 26.3L case with mounts for up to 10 120mm fans, a 360mm radiator and steel mesh panels.
View on Amazon
Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5
An 11-liter Mini-ITX case with a sandwich layout, a 240mm AIO and mesh panels on the bottom, sides and top.
View on Amazon
Fractal Design Terra Jade
A 10.4L Mini-ITX case with a slidable central wall that gives 30 mm of internal flexibility for the build.
View on Amazon
Cooler Master NR200P V3 Mini-ITX PC Case
An 18.6L Mini-ITX case with top mounts for 240mm or 280mm radiators, a vented mesh side panel and tool-free panels.
View on AmazonThese come from our ranked list Best ITX Case, which compares them spec by spec.
FAQ
How many fans can I mount in a PC case?
It depends on the case. The Lian Li A3-mATX lists mounts for up to 10 120mm fans, and the Cooler Master NR200P V3 lists top mounts for 240mm or 280mm radiators. Check your case manual for the mounts and sizes it lists.
Which way should a PC fan blow?
Front and bottom fans should pull air into the case, and rear and top fans should push air out. Check the arrows on the fan frame for the airflow direction, and mount each fan so the arrows point the way you want the air to move.
Do I need a radiator to mount PC fans?
No. Fans mount directly to the case panels, and a radiator is only needed for water cooling. The Lian Li A3-mATX supports a 360mm radiator, and the Cooler Master NR200P V3 supports 240mm or 280mm radiators, but fans work without one.




