How to Install a Second Graphics Card
To install a second graphics card, shut the PC down, unplug it, and fit the card into a free PCIe slot on the motherboard, then connect its power cables and install the driver. A second card fits in a free PCIe slot with room beside it, power cables from the supply, and driver software that sees the card. Check the slot, space and power first.
Check the motherboard and the case space
Open the case manual and look for a free PCIe slot on the motherboard, and check that the slot sits where a card has room beside it. Measure the space from the slot to the case side and to the next card, since a wide card can cover the slot beside it. The ASUS cards below take a 2.5-slot space, so check the width your case allows. Also check that the case has a free bracket opening at the back for the card ports.
Check the power supply and cables
Look at the power supply for free PCIe power cables that match the card, and check the wattage figure on the supply against the figure the card maker lists. If no free cable fits the card, stop and fit a supply with the right cables instead of using an adapter. Plug the cables in firmly and route them so they clear the fans. Keep the case manual near you while you work.
Fit the second card
Shut the PC down and unplug it, then follow the case manual to open the case. Press the card into the free PCIe slot until it sits level and the bracket lines up with the case opening, then fix the bracket with the case screw or clip. Connect the power cables to the card and check that the card does not press on cables or fans. Close the case and plug the PC back in.
Install the driver and pick the card
Start the PC and open the driver software for the card maker, then install the driver for the new card and restart the PC if the installer asks. Open the display settings and check that the card shows in the device list. If the screen stays black, shut the PC down, unplug it, and press the card back into the slot. Set the monitor cable to the card you want to drive the display.
Decide how the cards work together
A second card can drive extra monitors, run a separate app, or sit idle until the software picks it. Open the settings of the app you want the second card for and pick the card there, since the app may still point at the first card. If the app shows only the first card, update its driver and check the app notes for multi-GPU support. Remove the card and try the first card alone if the PC fails to start.
What you need

ASUS PRIME GeForce RTX 5060 Ti 16GB
A GeForce RTX 5060 Ti card with 16 GB GDDR7 memory, PCIe 5.0, HDMI, a 2.5-slot design, Axial-tech fans and Dual BIOS.
View on Amazon
ASUS Prime GeForce RTX 5060 Ti 8GB
A GeForce RTX 5060 Ti card with 8 GB GDDR7 memory, PCIe 5.0, HDMI, a 2.5-slot design, Axial-tech fans and Dual BIOS.
View on Amazon
MSI Gaming RTX 3050 LP 6G OC Graphics Card
A GeForce RTX 3050 low-profile card with 6 GB GDDR6 memory, HDMI 2.1 and DisplayPort outputs.
View on Amazon
NVIDIA RTX 4000 SFF Ada Generation Workstation Ada Lovelace Architecture Dual Slot Low Profile Professional Graphics Board 900-5G192-2571-000 VD8465
An NVIDIA RTX 4000 SFF Ada Generation workstation card with a dual-slot low-profile design.
View on AmazonThese come from our ranked list Best Sff GPU, which compares them spec by spec.
FAQ
Do two graphics cards double gaming speed?
No. A second card does not add its speed to the first card, and each app decides how it uses the cards. Check the notes for your app to see if it uses a second card at all.
Can I mix two different graphics cards?
Yes, for separate monitors or apps, but the cards do not work as one card. Pick the card you want in each app settings, and install the driver for each card maker.
Why does the PC not see the second card?
The card may sit loose in the slot, or its power cables may not be seated. Shut the PC down, unplug it, press the card firmly into the slot, check the cables, and look in the device list again.




