How to Install a Graphics Card Sideways
Install a graphics card sideways by fitting it in a vertical mount in the case and connecting it to the motherboard with a riser cable. Shut the PC down and unplug it first, and follow the case and motherboard manuals for opening the case. Then seat the card in the mount, connect power to the card, and install the driver from the card maker's site.
Shut down and open the case
Shut the PC down, unplug it from the wall, and follow the case and motherboard manuals for opening the case. If the PC is still under warranty, contact the maker before you open it. Touch a bare metal part of the case to discharge static, and work on a clear surface with the case lying flat if the manual shows it that way. Keep the screws from the slot covers in a small dish so they do not roll away.
Check the case for a vertical mount
Open the case manual and look for vertical slots or a vertical mount bracket in your case, and check whether the case maker lists a riser cable for it. Check the thickness of your card against the room in the case: the ASUS cards here use a 2.5-slot design, and the NVIDIA card here uses a dual-slot design. Check the gap between the card fans and the side panel in the manual, since the fans need air from the case.
Fit the riser cable and mount
Seat the riser cable in the PCIe slot on the motherboard and press it down evenly until the slot latch clicks. Fasten the vertical mount bracket with the screws that came with the case or the mount, and check that the bracket sits level and firm. Check that the riser matches the PCIe version the card and the board use, and read the riser and motherboard manuals before you fit the card.
Seat the card sideways in the mount
Line up the card with the connector on the riser cable and press it down evenly until it sits fully in the connector. Fasten the bracket screw at the back of the case so the card does not move. Leave a gap between the card fans and the side panel when the case allows it, and route the riser cable away from fans and sharp edges so it does not pull on the card.
Connect power and install the driver
Plug a power connector from the power supply into the card, and check that the plug sits fully in its socket. Close the case, plug the PC back in, and connect the monitor to the card. Start the PC, then download the driver from the card maker's site and install it. Open your display settings and check that the card and the screen appear.
What you need

ASUS PRIME GeForce RTX 5060 Ti 16GB
A 16 GB GDDR7 card on PCIe 5.0 with HDMI, a 2.5-slot design, dual BIOS and axial-tech fans.
View on Amazon
ASUS Prime GeForce RTX 5060 Ti 8GB
An 8 GB GDDR7 card on PCIe 5.0 with HDMI, a 2.5-slot design, dual BIOS and axial-tech fans.
View on Amazon
MSI Gaming RTX 3050 LP 6G OC Graphics Card
A 6 GB GDDR6 card with a 1492 MHz boost clock, one DisplayPort and two HDMI 2.1a outputs.
View on Amazon
NVIDIA RTX 4000 SFF Ada Generation Workstation Ada Lovelace Architecture Dual Slot Low Profile Professional Graphics Board 900-5G192-2571-000 VD8465
A dual-slot low-profile workstation card built on the Ada Lovelace architecture.
View on AmazonThese come from our ranked list Best Sff GPU, which compares them spec by spec.
FAQ
Does a sideways card need a riser cable?
Yes. A vertical mount holds the card sideways, and a riser cable connects the card to the PCIe slot on the motherboard. Check the case manual for the mount and the riser the case maker lists for your case.
Does mounting a card sideways change its cooling?
The fans still move air across the card, but the side panel sits closer to the fans than in a flat mount. Check the clearance in your case manual and leave a gap for air when the case allows it.
Can any graphics card mount sideways?
A card mounts sideways when it fits the mount and the case. Check the card thickness against the case manual: the ASUS cards here use a 2.5-slot design, the NVIDIA card here uses a dual-slot design, and the MSI card is a low-profile card.




