Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Install a PC Case Fan

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To install a PC case fan, mount it to a fan mount inside the case, plug its cable into a fan header on the motherboard, and check that it spins. Point the fan so air flows in the direction you want, with front and bottom fans pulling air in and rear and top fans pushing air out. Shut the PC down and unplug it before you open the case.

  1. Shut down and unplug the PC

    Shut the PC down through the operating system, then unplug the power cable from the wall and from the case. Press the power button again to drain leftover charge, then set the case on a clear table with the side panel facing up. Read the case manual for how its side panel comes off, since clips and screws differ between cases. Keep the screws in a small cup while you work.

  2. Choose where the fan goes

    Pick a mount that matches the fan size, such as a 120 mm mount for a 120 mm fan. Front and bottom mounts work as intake, pulling cool air into the case, while rear and top mounts work as exhaust, pushing warm air out. Plan the flow so air moves across the parts, from intake to exhaust. Leave a clear path in front of each fan, and move cables out of the way before you mount anything.

  3. Mount the fan in place

    Hold the fan against the mount with the airflow arrow pointing the way you planned. Line up the holes in the fan frame with the holes in the case, then put screws through the holes and tighten them by hand with a screwdriver. Tighten the screws in turn so the fan sits flat, and stop when a screw feels snug. Check that the blades spin freely by hand before you move on.

  4. Connect the fan cable

    Find a fan header on the motherboard, following the board manual for its location. Push the fan plug onto the header until it seats, and keep the cable clear of the blades. If the cable is short, route it along the case edge and secure it with a tie so it cannot slip into the fan. Never force a plug that does not fit the header.

  5. Power on and check the fan

    Plug the power cable back in and start the PC. Watch the new fan to confirm it spins, and hold a hand near the case vents to feel which way the air moves. If the fan does not spin, shut the PC down, unplug it, and check that the plug sits firmly on the header. Once the fan runs the right way, shut down again and refit the side panel.

What you need

Lian Li A3-mATX PC Case

Lian Li A3-mATX PC Case

A compact mATX case with steel mesh panels that fits up to 10 120 mm fans and a 360 mm radiator, with no fans included.

View on Amazon
Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5

Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5

A compact 11-liter Mini-ITX case with mesh panels on the bottom, sides and top, built for a 240 mm AIO and a triple-slot GPU.

View on Amazon
Fractal Design Terra Jade

Fractal Design Terra Jade

A 10.4 liter Mini ITX case with anodized aluminum panels and a walnut front panel, sized for a GPU up to 322 mm long.

View on Amazon
Cooler Master NR200P V3 Mini-ITX PC Case

Cooler Master NR200P V3 Mini-ITX PC Case

A Mini-ITX case with a vented mesh side panel and room for top-mounted 240 or 280 mm radiators and a vertical GPU mount.

View on Amazon

These come from our ranked list Best ITX Case, which compares them spec by spec.

FAQ

Which way should a PC case fan face?

Face intake fans so they pull air into the case, and exhaust fans so they push air out. Front and bottom fans pull air in, while rear and top fans push it out, so air flows across the parts.

How many case fans does a PC need?

It depends on the case and the parts inside. Check how many fan mounts your case lists, and fill the mounts that fit the airflow path you planned.

Can I install a case fan without removing parts?

Often yes, if the mount is easy to reach. In compact cases, removing the graphics card first can give your hands room to work, so follow the case manual and refit the part the same way it came out.

Ranked pc cases guides