How to Connect Earphones to a PC
Plug wired earphones into the 3.5mm headphone jack on your PC, or plug a USB headset into a USB port. Then open the sound settings and select the headset as the output device, and as the input device if it has a microphone. If you hear nothing, check that the plug sits fully in the jack and that the volume is up.
Find the port on your PC
Look for a 3.5mm headphone jack on the front or back of a desktop PC, or on the side of a laptop. The jack often sits near the USB ports or next to a small headphone symbol. If your earphones end in a USB plug instead, use a free USB port on the PC. Check the manual for your PC if you cannot find the jack, since the port layout changes from one model to the next.
Plug in a 3.5mm headset
Push the 3.5mm plug straight into the headphone jack until it sits fully in place. A plug that sits halfway in can give sound in one ear only, so check that it is pushed in all the way. The Razer BlackShark V2 X connects through a 3.5mm audio jack, and the HyperX Cloud III also offers 3.5mm connectivity alongside USB-C and USB-A. Leave the headset volume control where you can reach it while you listen.
Plug in a USB headset
Push the USB plug into a free USB port and wait a moment for the PC to recognize the headset. The BENGOO G9000 connects by USB, and the HyperX Cloud III connects by USB-C or USB-A. The BENGOO G9000 has a rotary volume controller and a microphone mute key on its braided USB cable. Do not force the plug; turn it over if it does not fit.
Select the headset in sound settings
Open the sound settings on your PC and pick the headset as the output device. If the headset has a microphone, pick it as the input device on the same screen. Play a sound and listen through the headset to confirm the choice took effect. If the sound still comes from the speakers, open the settings again and check that the headset is the device listed as the output.
Check the microphone
Speak into the microphone and watch the input level in the sound settings. If the level does not move, check that the microphone is not muted and that the headset is the input device. The Razer BlackShark V2 X has a cardioid microphone, and the HyperX Cloud III has a 10mm microphone with a mute indicator. Adjust the microphone position so it sits near your mouth without touching it.
What you need

Razer BlackShark V2 X Gaming Headset
A 3.5mm headset with 50mm drivers, a cardioid microphone and memory foam cushions, for PC, PS4, PS5 and Switch.
View on Amazon
Razer BlackShark V2 X Gaming Headset for PC
A white 3.5mm headset with 50mm drivers, a bendable cardioid microphone and memory foam ear cushions.
View on Amazon
HyperX Cloud III Wired Gaming Headset for PC
A wired headset with USB-C, USB-A and 3.5mm connectivity, 53mm drivers and a 10mm microphone with a mute indicator.
View on Amazon
BENGOO G9000 Stereo Gaming Headset for PS4 PC Xbox One PS5 Controller
A USB headset with 40mm drivers, a noise-isolating microphone and a rotary volume control on its braided cable.
View on AmazonThese come from our ranked list Best PC Headset, which compares them spec by spec.
FAQ
Why is there no sound from my earphones?
Check that the plug sits fully in the jack and that the headset is the output device in the sound settings. Turn the volume up on the PC and on the headset control if it has one.
Can I use a gaming headset with a microphone on a PC?
Yes. Plug the headset in through its 3.5mm jack or USB plug, then select it as both the output and the input device in the sound settings. The headsets here all have a microphone, including the Razer BlackShark V2 X, the HyperX Cloud III and the BENGOO G9000.
Do I need an adapter to connect earphones to a PC?
Sometimes. A single 3.5mm plug for sound and microphone needs a splitter on a PC with separate headphone and mic jacks, and a USB-A plug needs an adapter on a USB-C-only laptop. Check the plug on your earphones first, then match it to the port on your PC. If the plug does not match, check the headset manual for the adapter it needs.




