How to Clean a Headset
To clean a headset, unplug it and wipe the earcups, headband, microphone and cable with a dry soft cloth. For marks on the ear cushions, use a cloth that is lightly damp with water and a drop of mild soap, then wipe again with a dry cloth. Let the headset dry fully before you plug it back in and use it.
Unplug the headset
Unplug the headset from the computer or controller before you clean it. Dust and skin oils build up on the earcups, headband and cable during use, and a dry cloth takes most of it off. Wipe the surfaces with a soft dry cloth, working around the earcups and along the headband. Use a dry cotton swab for the small gaps where the earcups meet the frame, since a cloth cannot reach into them. Do not use a wet cloth on the headset at this stage.
Wipe the ear cushions with a damp cloth
Dampen a soft cloth with water and wring it out so it is barely wet. Add a drop of mild soap for marks that water alone does not lift. Wipe the ear cushions gently, then wipe them again with a clean cloth that is damp with water only. Finish with a dry soft cloth so no moisture sits on the cushions. Do not soak the cushions or hold them under running water.
Clean the microphone and the cable
Wipe the microphone boom and the tip of the mic with a dry soft cloth. Dust and moisture collect on the mic during use, and a dry cloth lifts them without pushing them inside. Wipe the cable from the headset to the plug, and wipe the plug itself with a dry cloth. Keep the plug dry and do not bend the cable sharply where it meets the plug.
Let the headset dry before you use it
Leave the headset in open air until the cushions, headband and microphone feel dry to the touch. A damp headset can trap moisture in the foam and on the drivers, so give it time to dry fully. Do not use a hair dryer or place the headset near a heater. Plug the headset back in only after the cushions, headband and microphone feel dry.
Store the headset where it stays clean
Hang the headset on a stand or lay it flat when you are done, so the ear cushions keep their shape. Keep it away from dust and out of direct sunlight. Coil the cable loosely instead of wrapping it tight around the headset, so the cable does not kink where it meets the plug.
What you need

Razer BlackShark V2 X Gaming Headset
A wired headset with 50mm drivers, memory foam cushions and a 3.5mm audio jack, made for PC, PS4, PS5 and Switch.
View on Amazon
Razer BlackShark V2 X Gaming Headset for PC
A white wired headset with 50mm drivers, a cardioid mic and memory foam cushions, made for PC, Mac, PS4, PS5 and Switch.
View on Amazon
HyperX Cloud III Wired Gaming Headset for PC
A wired headset with 53mm drivers, a 10mm mic, memory foam cushions and USB-C, USB-A and 3.5mm connections.
View on Amazon
BENGOO G9000 Stereo Gaming Headset for PS4 PC Xbox One PS5 Controller
A USB headset with 40mm drivers, 7.1 surround sound, soft memory earmuffs and LED lights on the earcups.
View on AmazonThese come from our ranked list Best PC Headset, which compares them spec by spec.
FAQ
Can I wash the ear cushions under water?
No. Water can soak into the foam and damage the headset, so wipe the cushions with a lightly damp cloth and dry them with a soft cloth instead.
How often should I clean my headset?
Clean it when the ear cushions look dirty, the sound seems muffled, or the headset smells stale. Wipe the earcups and headband after long sessions, and clean the microphone when your voice sounds dull to others.
Can I use soap on my headset?
A drop of mild soap on a damp cloth is fine for the ear cushions and headband. Wipe the soap off with a clean damp cloth, then dry the headset with a soft cloth before you use it.




