Amazon Black Friday Week deals

Paid link

Docks · How-to guide

How to Connect a Monitor to a Docking Station

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Connect the monitor to the docking station with an HDMI or DisplayPort cable, then connect the dock to the laptop with its USB-C cable and plug the dock into power. The laptop should detect the monitor, and you can then choose extend or mirror in the display settings. Check first that the laptop's USB-C port supports video output, since a data-only port leaves the monitor blank.

  1. Check your laptop's USB-C port

    A USB-C port does not always carry video. Check your laptop's manual or spec sheet for DisplayPort Alt Mode, Thunderbolt or USB4 on the port you plan to use. If the port only carries data, a monitor attached to the dock stays blank even when the dock's USB ports work. The Acer and Anker docks both note the same check, so confirm the laptop port carries video before you buy.

  2. Connect the monitor to the dock

    Use an HDMI cable between the monitor and the matching HDMI port on the dock. The Anker and Acer docks each have two HDMI ports. The two Dell docks each have HDMI and DisplayPort, so use a DisplayPort cable only with a Dell dock. For two monitors, use one cable per monitor and match each cable to a port on the dock. Tighten the cable at both ends so it sits fully in the port.

  3. Connect the dock to the laptop

    Plug the dock's USB-C cable into the laptop port you checked, then plug the dock into power. The Anker hub needs a 100 W PD wall charger and a USB-C to USB-C cable, which are not in the box, and the Acer dock needs a 100 W or higher power adapter, also not included. Once the laptop sees the dock, the monitor should light up. If it stays blank, check the monitor input and the cable.

  4. Set the display mode

    Open the display settings on your laptop and choose extend to use the monitor as extra space or mirror to show the same picture on both screens. Set the resolution the monitor supports, such as 4K, and the refresh rate the dock lists for the number of monitors you connected. On macOS, the Anker and Acer docks mirror the same picture to two monitors, so check the dock's notes before planning two different screens.

  5. Match the charging wattage

    Compare the dock's power delivery figure with the charger that came with your laptop. The Anker hub passes up to 85 W, the Acer dock delivers up to 90 W, the Dell WD25 drives up to 100 W and the Dell WD19S delivers 130 W. A dock that passes less power than the laptop's own charger still charges it, but more slowly under load, so check the figure before you rely on the dock alone.

What you need

Anker Laptop Docking Station Dual Monitor

Anker Laptop Docking Station Dual Monitor

An 8-in-1 USB-C hub with two HDMI ports, Ethernet and a card reader, passing up to 85 W of power to the laptop.

View on Amazon
Dell Pro Laptop Docking Station WD25

Dell Pro Laptop Docking Station WD25

A USB-C dock with HDMI, DisplayPort and Ethernet, delivering up to 100 W and listed with support for up to four displays.

View on Amazon
Acer USB-C Docking Station Dual Monitor

Acer USB-C Docking Station Dual Monitor

A 9-in-1 USB-C dock with two HDMI ports at 4K 60 Hz, USB-A and USB-C ports, a card reader and up to 90 W charging.

View on Amazon
Dell WD19S 180W Docking Station (130W Power Delivery) USB-C

Dell WD19S 180W Docking Station (130W Power Delivery) USB-C

A USB-C dock with HDMI and dual DisplayPort, delivering 130 W of power from a 180 W dock.

View on Amazon

These come from our ranked list Best Docking Station, which compares them spec by spec.

FAQ

Why does my monitor stay blank on a docking station?

The laptop's USB-C port may not carry video, or the monitor may sit on the wrong input. Check that the port supports DisplayPort Alt Mode, Thunderbolt or USB4, then check the monitor input and the cable. Also confirm the dock has power.

Can I connect two monitors to one docking station?

Yes, if the dock has two video outputs and your laptop supports them. The Anker and Acer docks each have two HDMI ports. The two Dell docks have HDMI and DisplayPort ports. On macOS, some docks mirror the same picture to both monitors.

Do I need a separate charger for the dock?

Some docks need one. The Anker hub needs a 100 W PD wall charger and a USB-C to USB-C cable, neither in the box, and the Acer dock needs a 100 W or higher adapter that is not included. Check what comes in the box before you buy.

Ranked docking stations guides