Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Clean a PC With Compressed Air

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To clean a PC with compressed air, shut the PC down, unplug it, and open the side panel. Blow dust out of the case in short bursts, holding each fan still, and work from the top of the case down so dust leaves instead of settling deeper. The four cases below all use mesh panels, and the MONTECH case also has dust filters.

  1. Shut down and open the case

    Shut the PC down and unplug it before you touch anything inside, and follow the maker's manual for your case. Remove the side panel and set it aside, then move the PC where the dust can leave the case instead of settling on your desk. Keep the panel out of the way while you work.

  2. Blow dust out in short bursts

    Use short bursts of air and keep the nozzle a short distance from the parts, so dust lifts off without being driven deeper into the case. Work from the top of the case down and from the back toward the open side, so the dust has a way out. Pause between bursts and let the dust settle out of the case before the next pass.

  3. Clean the fans, filters and mesh

    Dust gathers on fan blades, so hold each fan still and blow the dust off it, then do the same for the next fan. The MONTECH case ships with four fans, and the Antec and Okinos cases each ship with five, so every fan needs a pass. Blow dust off the mesh panels and the MONTECH dust filters from inside the case, so the dust leaves through the mesh instead of falling back in.

  4. Close the case and check it

    Put the side panel back and fix it as the maker's manual shows, then plug the PC in and switch it on. Listen for the fans and check that air moves through the case as it did before. If a fan does not spin or the PC shuts itself down, shut it down, unplug it and contact the maker instead of opening it again.

What you need

MONTECH AIR 903 MAX High-Airflow E-ATX Mid-Tower PC Case

MONTECH AIR 903 MAX High-Airflow E-ATX Mid-Tower PC Case

A high-airflow E-ATX mid-tower with four fans fitted, dust filters, a mesh front panel and tempered glass.

View on Amazon
Antec P30 AIR Mid-Tower ATX Case

Antec P30 AIR Mid-Tower ATX Case

An ATX mid-tower with five PWM fans fitted, a metal mesh front panel, wood accents and a tool-free tempered glass side panel.

View on Amazon
Okinos Air Cross

Okinos Air Cross

An ATX mid-tower with five fans fitted, mesh panels, walnut wood accents and tool-free tempered glass and steel panels.

View on Amazon
Hyte X50 Air

Hyte X50 Air

An ATX mid-tower with a curved micro mesh side panel, a stamped steel front panel and louvered blades for exhaust.

View on Amazon

These come from our ranked list Best Air PC Case, which compares them spec by spec.

FAQ

Should the PC stay plugged in while I clean it?

No. Shut the PC down and unplug it first, and follow the maker's manual for your case. Plug it back in only after the side panel is back on.

Can I let the air spin the fans?

No. Hold each fan still while you blow dust off it, so the air does not spin it. Work through the fans in turn and pause between bursts.

How do I clean the dust filters and mesh?

Blow dust off the filters and mesh panels from inside the case, so the dust leaves through the mesh. The MONTECH case has dust filters, and the Antec, Okinos and Hyte cases all use mesh panels too.

Do I need to remove parts to clean the PC?

No. Blow the dust out with the parts in place and follow the maker's manual. If a part looks broken or the PC will not start, contact the maker.

Ranked pc cases guides