Amazon Black Friday Week deals

Paid link

Headsets · How-to guide

How to Clean a Headset Cable

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To clean a headset wire, unplug the headset, wipe the cable with a dry soft cloth, and use a cloth barely damp with water only on stuck grime. Wipe the plug dry, let the cable dry fully, and check the wire for cuts or fraying before you plug it back in.

  1. Unplug the headset first

    Disconnect the headset cable from the computer, console or controller before you clean it, so no audio or power runs through the wire while you work. Lay the cable out straight on a clean, dry surface so you can reach its full length. Check the maker's manual for your model before you start, and keep the plug ends where you can see them.

  2. Wipe the cable with a cloth

    Run a dry, soft cloth along the cable from the earcup to the plug, turning the cable as you go so you clean all sides. For grime that does not come off dry, dampen the cloth with a little water and wring it out until it is barely damp. Wipe the cable again, then wipe it dry with a second dry cloth. Work gently around any inline volume controller or mute switch on the wire.

  3. Clean the plug and connector

    Wipe the metal plug with a dry, soft cloth and brush dust off its edges with a soft, dry brush. Keep water and cleaning liquid off the plug contacts and out of the socket on your device. Do not push anything metal or sharp into the connector, and do not bend the plug while you clean it.

  4. Check the wire for damage

    Run your fingers lightly along the cable and look for cuts, fraying, exposed wires, kinks or a loose plug. Check where the cable meets the earcup and the plug, since those joints bend the most. If you find damage, stop using the headset and contact the maker. Do not cut, splice or tape a damaged wire as a repair.

  5. Let it dry before you plug it in

    Leave the cable on a dry surface until every part feels dry, including the plug and any inline controller. Plug the headset back in and play sound to check both sides work and the microphone picks up your voice. If one side cuts out when the cable moves, unplug it and check the plug and socket again.

What you need

Razer BlackShark V2 X Gaming Headset

Razer BlackShark V2 X Gaming Headset

A wired gaming headset with a 3.5mm audio jack, so unplug the 3.5mm cable and wipe it dry before reconnecting.

View on Amazon
Razer BlackShark V2 X Gaming Headset for PC

Razer BlackShark V2 X Gaming Headset for PC

A wired gaming headset with a 3.5mm audio jack and cardioid mic, so clean the cable and plug while it is unplugged.

View on Amazon
HyperX Cloud III Wired Gaming Headset for PC

HyperX Cloud III Wired Gaming Headset for PC

A wired gaming headset with USB-C, USB-A and 3.5mm connectivity, so disconnect each cable before you wipe it.

View on Amazon
BENGOO G9000 Stereo Gaming Headset for PS4 PC Xbox One PS5 Controller

BENGOO G9000 Stereo Gaming Headset for PS4 PC Xbox One PS5 Controller

A wired gaming headset with a braided USB cable and rotary volume controller, so wipe the cable and controller gently.

View on Amazon

These come from our ranked list Best PC Headset, which compares them spec by spec.

FAQ

Can I use water to clean a headset wire?

Yes, but only a cloth barely damp with water on the cable itself, never on the plug contacts. Wipe the cable dry right after and let it dry fully before you plug the headset back in.

How do I clean a braided headset cable?

Brush dust out of the braid with a soft, dry brush, then wipe along the cable with a dry cloth. Use a barely damp cloth only on stuck grime, and dry the cable fully before reconnecting it.

What if the headset wire is frayed?

Stop using the headset and do not try to splice or tape the wire yourself. Contact the maker for advice, since a damaged cable can cut out or short while you use it.

Ranked headsets guides