How to Clean Headphone Ear Pads
Remove the ear pads from the headset, then wipe away dust and skin oils with a dry cloth. Wash removable pads in mild soapy water, rinse them, and let them air-dry fully before you put them back. Clean fixed pads in place with a damp cloth and leave the headset to dry before use.
Remove the ear pads first
Check your headset manual for how the pads fit before you pull at them. Some pads pull or twist off the earcup, while others stay fixed to the headset. Hold the earcup steady and ease a removable pad off slowly so you do not tear the seam or stretch the foam. Set the pads on a clean towel while you work.
Wipe off dust and surface dirt
Start with a dry, lint-free cloth and wipe the pads and the earcups to lift dust, hair and loose dirt. Work around the seam and the inner edge where dirt collects, and use a soft brush for crumbs caught in the stitching. Keep the cloth dry at this stage so dirt does not turn into mud on the foam. A quick wipe after each use keeps buildup low between deeper cleans.
Wash removable pads in soapy water
Fill a bowl with lukewarm water and a small amount of mild soap, then press the pads gently under the surface and squeeze them to work the soapy water through the foam. Rinse them in clean water until the water runs clear and no soap remains. Press them between towels to remove water, then set them out to air-dry. Do not wring them or use heat to dry them.
Clean pads that stay on the headset
Dampen a cloth with mild soapy water and wring it out, then wipe the pads slowly so the foam stays damp rather than soaked. Wipe again with a cloth dampened in clean water to lift the soap. Dry the pads with a towel and leave the headset in open air until the pads feel dry to the touch. Never plug the headset in while the pads are still damp.
Know when the pads need cleaning
Clean the pads when you see dirt or sweat marks on the surface, when the foam feels sticky, or when the headset smells stale after use. Pads that sit against skin pick up oils and sweat, and foam that stays damp can smell. A regular wipe keeps the pads fresh, and a wash restores pads that look dull or feel grimy.
What you need

Razer BlackShark V2 X Gaming Headset
A Razer BlackShark V2 X with breathable memory foam ear cushions and 50mm drivers, connecting through a 3.5mm jack.
View on Amazon
Razer BlackShark V2 X Gaming Headset for PC
A white Razer BlackShark V2 X with leatherette memory foam ear cushions and 50mm drivers, connecting through a 3.5mm jack.
View on Amazon
HyperX Cloud III Wired Gaming Headset for PC
A HyperX Cloud III with memory foam ear pads and 53mm drivers, connecting through USB-C, USB-A or a 3.5mm jack.
View on Amazon
BENGOO G9000 Stereo Gaming Headset for PS4 PC Xbox One PS5 Controller
A BENGOO G9000 with soft memory foam earmuffs and protein leather over-ear pads, connecting through USB.
View on AmazonThese come from our ranked list Best PC Headset, which compares them spec by spec.
FAQ
Can I wash headphone ear pads in water?
Removable pads can be washed in mild soapy water and rinsed clean, then air-dried fully before use. Pads fixed to the headset should be wiped with a damp cloth instead, so water does not reach the drivers.
How do I dry ear pads after washing them?
Press the pads between towels to remove water, then set them out in open air until they feel dry through. Do not use heat, and do not put the pads back on the headset while they are still damp.
Can I use soap on memory foam ear pads?
Yes, mild soap in lukewarm water suits memory foam pads. Rinse the pads until no soap remains, then air-dry them fully, since soap left in the foam can leave a residue.




