Amazon Black Friday Week deals

Paid link

Headsets · How-to guide

How to Clean Headphone Cushions

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Clean headphone cushions by wiping the surface with a cloth dampened with water and a small amount of mild soap, then wiping again with a clean damp cloth and letting the cushions dry fully before use. Keep liquid out of the foam and drivers, and check the maker's manual before you remove any cushion.

  1. Check the cushion material first

    Look at what covers the foam before you pick a cleaner. Memory foam cushions with a leatherette or protein leather cover take a damp wipe well. The Razer BlackShark V2 X has breathable foam ear cushions, so match the cleaner to the material on your own cushions. Read the maker's manual for your headset, since it states whether the cushions come off and which cleaners to avoid on the cover material.

  2. Remove the cushions if they come off

    If the manual shows that the cushions pull or twist off, remove them over a clean table so small parts stay in reach. Work one side at a time and note how the cushion seats on the earcup. If the cushions stay fixed, leave them in place and clean them on the headset with the earcups facing down, so drips fall away from the drivers.

  3. Wipe, do not soak, the foam

    Dampen a soft cloth with water, add a small amount of mild soap, and wring the cloth until it feels barely damp. Wipe the cushion surface in short strokes and turn the cloth as it picks up oils and dust. Follow with a second cloth dampened with plain water to lift soap residue. Keep the foam itself dry, since soaked foam dries slowly and can hold odor.

  4. Dry fully and refit the cushions

    Pat the cushions with a dry cloth and leave them in moving air until the cover and foam feel dry to the touch. Press gently around the edge to check for damp spots before you refit anything. Seat each cushion evenly around the earcup and check that the seal looks even on both sides. Store the headset where air can reach the cushions between uses.

What you need

Razer BlackShark V2 X Gaming Headset

Razer BlackShark V2 X Gaming Headset

Breathable foam ear cushions on a memory foam design, with closed earcups that cover the ears.

View on Amazon
Razer BlackShark V2 X Gaming Headset for PC

Razer BlackShark V2 X Gaming Headset for PC

Leatherette with memory foam ear cushions and thicker headband padding in a white finish.

View on Amazon
HyperX Cloud III Wired Gaming Headset for PC

HyperX Cloud III Wired Gaming Headset for PC

Memory foam cushions with an aluminum frame and USB-C, USB-A and 3.5mm connectivity.

View on Amazon
BENGOO G9000 Stereo Gaming Headset for PS4 PC Xbox One PS5 Controller

BENGOO G9000 Stereo Gaming Headset for PS4 PC Xbox One PS5 Controller

Soft memory earmuffs with protein over-ear pads and skin friendly leather material.

View on Amazon

These come from our ranked list Best PC Headset, which compares them spec by spec.

FAQ

Can I wash headphone cushions in water?

Avoid soaking cushions in water. Foam holds liquid and dries slowly, and water can reach the drivers. Wipe the cover with a barely damp cloth instead, and follow the maker's manual for your headset.

How do I clean leatherette memory foam cushions?

Wipe the leatherette cover with a cloth dampened with water and a small amount of mild soap, then wipe again with a clean damp cloth. Dry the surface fully before use and keep liquid out of the foam.

When should I replace cushions instead of cleaning them?

Replace cushions when the cover cracks, peels or tears, when the foam stays flat after use, or when odor remains after cleaning and full drying. Check the maker's manual for the correct replacement cushions for your model.

Ranked headsets guides