How to Clean Earwax Off Headphones
Clean earwax off headphones by removing loose wax dry first, then wiping the ear cushions with a cloth lightly dampened with water. Keep liquid away from the driver openings and the cable connections. Let every part dry fully before you wear the headphones again.
Unplug the headphones and gather dry tools
Disconnect the headphones from your computer, console or phone before you start. Set out a soft dry cloth, a soft brush with dry bristles, cotton swabs and a second cloth for damp wiping. Work on a clean dry surface with good light so you can see wax on the cushions and mesh. Check the maker manual for cushion care notes before you use any liquid.
Brush loose wax from cushions and mesh
Hold each earcup over your work surface and brush loose wax off the cushion surface with light strokes. Use the dry brush on the mesh or fabric over the driver without pressing hard. Lift wax away from the surface instead of pushing it deeper into the mesh. Shake or tap loose debris off the brush away from the headphones as you work.
Wipe cushions with a lightly damp cloth
Dampen a soft cloth with water and wring it out so it feels damp, not wet. Wipe the outer cushion surface with light passes and turn the cloth to a clean area as wax lifts off. Keep the damp cloth on the cushion material only and away from seams, openings and controls. If wax remains, repeat with a clean damp area instead of soaking the cushion.
Clean the grille without pushing wax inside
Use a dry cotton swab to lift wax from the edge of the grille or mesh with small rolling motions. Work around the edge and avoid poking the swab through the mesh toward the driver. Do not spray liquid into the earcup and do not use sharp tools to scrape the surface. If wax sits under the mesh, stop and follow the maker manual for service guidance.
Dry every part before you listen again
Wipe the cushions once more with a dry cloth to pick up surface moisture. Leave the headphones in open air with the cushions exposed until the material feels dry to the touch. Check the mesh, seams and cable ends for trapped moisture before you reconnect anything. Store the headphones dry and clean the cloths so wax does not transfer back during the next use.
What you need

Razer BlackShark V2 X Gaming Headset
Closed earcups with breathable foam cushions and a 3.5mm connection for wired listening.
View on Amazon
Razer BlackShark V2 X Gaming Headset for PC
Leatherette memory foam ear cushions with closed earcups and a 3.5mm connection.
View on Amazon
HyperX Cloud III Wired Gaming Headset for PC
Memory foam cushions with 53mm drivers and USB-C, USB-A and 3.5mm connections.
View on Amazon
BENGOO G9000 Stereo Gaming Headset for PS4 PC Xbox One PS5 Controller
Protein over-ear pads with soft memory earmuffs and a USB connection.
View on AmazonThese come from our ranked list Best PC Headset, which compares them spec by spec.
FAQ
Can you use water on headphone ear cushions?
Use a cloth lightly dampened with water on the cushion surface only. Wring the cloth out well, keep liquid away from driver openings and seams, and let the cushions dry fully before use.
What should you avoid when cleaning headphones?
Avoid soaking the cushions, spraying liquid into the earcups and scraping with sharp tools. Do not open the earcups to reach the driver. Follow the maker manual and contact the maker if wax sits under the mesh.
How do you know cushions need cleaning again?
Look for visible wax on the cushion surface or mesh and residue that lifts onto a dry cloth. Clean again when buildup returns on the surface you touch, and dry the cushions fully after each cleaning.




