How to Choose a PC Case
Choose a PC case by matching it to your parts in a set order: motherboard form factor first, then graphics card length, cooler or radiator support, power supply size, and front ports. A case that fits your board but not your graphics card or cooler will not work, so check each figure against the parts you plan to install before you buy.
Match the case to your motherboard
Start with the motherboard form factor, because it sets the size of the whole build. The Lian Li A3-mATX takes mATX and ITX motherboards and has 4 expansion slots. The Lian Li A4-H2OX5, Fractal Design Terra and Cooler Master NR200P V3 each take Mini-ITX motherboards. A Mini-ITX case will not fit a larger board, so read the form factor on your motherboard first and pick a case that names that same form factor.
Check graphics card length clearance
Measure your graphics card and compare its length with the clearance figure for the case. The Lian Li A3-mATX fits graphics cards up to 415mm. The Cooler Master NR200P V3 supports graphics cards up to 361.5mm with vertical mounting. The Fractal Design Terra fits a graphics card up to 322 mm in length. The Lian Li A4-H2OX5 supports a triple-slot graphics card mounted behind the motherboard. Slot thickness matters as well as length in small cases.
Check cooler and radiator support
Next, check how the case cools the parts inside. The Lian Li A3-mATX supports a 360mm radiator and up to 10 x 120mm fans behind steel mesh side and top panels. The Cooler Master NR200P V3 takes top-mounted 240/280mm radiators. The Lian Li A4-H2OX5 accommodates a 240mm AIO liquid cooler in an 11-liter body. If you plan a liquid cooler, match the radiator size to the mount the case names, and count the fan mounts for air cooling.
Check power supply and front ports
Small cases often limit the power supply type, so check that figure before you order. The Lian Li A3-mATX fits ATX, SFX and SFX-L power supplies at the front or side. The Lian Li A4-H2OX5 supports SFX and SFX-L power supplies. The Cooler Master NR200P V3 accommodates an SFX power supply up to 130mm long. Front ports differ too: the Fractal Design Terra has two front USB ports, including one USB Type-C 20Gbps port.
What you need

Lian Li A3-mATX PC Case
A 26.3L mATX case with steel mesh panels, room for a 415mm graphics card and a 360mm radiator, and no fans included.
View on Amazon
Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5
An 11-liter Mini-ITX case with a sandwich layout, a PCIe 5.0 riser cable, a triple-slot graphics card mount and 240mm AIO support.
View on Amazon
Fractal Design Terra Jade
A 10.4 L Mini ITX case with a walnut front panel, room for a graphics card up to 322 mm, and front USB Type-C.
View on Amazon
Cooler Master NR200P V3 Mini-ITX PC Case
An 18.6L Mini-ITX case with vertical graphics card mounting up to 361.5mm, a PCIe 5.0 riser cable and top radiator support.
View on AmazonThese come from our ranked list Best ITX Case, which compares them spec by spec.
FAQ
Does a Mini-ITX case fit a micro-ATX motherboard?
No. The Lian Li A4-H2OX5, Fractal Design Terra and Cooler Master NR200P V3 each take Mini-ITX motherboards. For a micro-ATX board, look at a case such as the Lian Li A3-mATX, which takes mATX and ITX motherboards.
How many fans can a small case hold?
It depends on the case. The Lian Li A3-mATX holds up to 10 x 120mm fans and supports a 360mm radiator, so count the fan mounts and radiator mounts on the case you pick before you buy fans.
What power supply fits a small case?
Check the power supply type and length for the case. The Cooler Master NR200P V3 takes an SFX power supply up to 130mm long, while the Lian Li A3-mATX fits ATX, SFX and SFX-L power supplies.




