How to Build a Silent PC
A silent PC comes from parts that move air without working hard: a case with open mesh panels, a large radiator, and large fans set to run slowly. Start with the case, since it sets how much room the radiator and fans have, then pick cooling that fits it. Three of the cases below take a radiator, and three have mesh panels for airflow.
Choose a case with open airflow
Start with the case, since it sets how much room the radiator and fans get. Mesh panels let air in and out with less resistance, so the fans do not have to spin as fast to move the same air. Look for room for a large radiator and for large fans, and leave space around the vents so air can reach them.
Use a large radiator for cooling
A radiator spreads heat over a wide surface, so its fans can turn more slowly than small fans on a cramped cooler. Mount the radiator where the case supports it, and check the size the case lists before you buy. Shut the PC down and unplug it before you open the case, and follow the maker's manual for the install.
Fit large fans and slow them down
Large fans move the same air as small ones at a lower speed, which is the simplest way to cut fan noise. Fill the mounts the case gives, and set the fans to run slowly when the PC idles and to rise only under load. Use the fan controls in the BIOS or the fan software, and check the result after each change.
Tidy cables and stop vibration
Cables in the airflow path force fans to work harder, so route them behind the motherboard tray and away from the fan blades. Tie loose cables down so they cannot drift into a fan. Set the PC on a solid surface with clear space around the vents, and keep the vents free of dust.
What you need

Lian Li A3-mATX PC Case
A 26.3L mATX case with steel mesh side and top panels, room for a 360mm radiator and up to 10 120mm fans, and a walnut wood front panel.
View on Amazon
Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5
An 11-liter Mini-ITX case with mesh panels on the bottom, sides and top, room for a 240mm AIO, and a triple-slot GPU mount on a PCIe 5.0 riser.
View on Amazon
Fractal Design Terra Jade
A 10.4L Mini-ITX case with a solid walnut front panel, anodized aluminum panels, and a slidable central wall with 30 mm of internal flexibility.
View on Amazon
Cooler Master NR200P V3 Mini-ITX PC Case
An 18.6L Mini-ITX case with a vented mesh side panel, room for top-mounted 240mm or 280mm radiators, and a vertical GPU mount with a PCIe 5.0 riser.
View on AmazonThese come from our ranked list Best ITX Case, which compares them spec by spec.
FAQ
Do I need a liquid cooler for a silent PC?
No. A large air cooler with a big fan can also run quietly. Three of the cases here list radiator room, so a liquid cooler fits the room they give; check the radiator size each case lists before you buy.
Does a mesh case make a PC louder?
Mesh panels let air through, so fans can run more slowly, but they also let fan noise out. A case with solid panels keeps more noise inside, while a mesh case needs fans set to a lower speed. Balance airflow against the noise that escapes.
Can I reuse my old fans in a new silent build?
Yes, if they fit the mounts and the case has room for them. Check the fan sizes the case lists, clean the dust from the blades, and set a slow fan curve in the BIOS so they run quietly at idle.




