How to Build a PC Case From Scratch
Building a PC case from scratch means making the enclosure that holds the motherboard, graphics card, power supply and cooling. Start by listing every part and its size, then design the frame, panels and mounts around those measurements. A ready compact case can show you the clearances to match.
List every part and its size
Write down the motherboard form factor, the graphics card length, the radiator size and the power supply size before you cut any material. The Lian Li A3-mATX fits mATX and ITX motherboards with graphics cards up to 415mm, while the Fractal Design Terra Jade fits Mini ITX boards with graphics cards up to 322 mm. The Cooler Master NR200P V3 fits Mini-ITX boards with graphics cards up to 361.5mm. Match each part to the space you plan.
Choose the frame and panels
Plan the panels around airflow and access to the parts inside. The Lian Li A3-mATX uses steel mesh side and top panels, and the Lian Li A4-H2OX5 uses an aluminum exterior with a steel interior. The Fractal Design Terra Jade pairs an anodized aluminum exterior with a solid walnut front panel, and the Lian Li A3-mATX has a walnut wood front panel. The Cooler Master NR200P V3 uses aluminum and mesh panels that come off without tools.
Plan airflow, fans and radiators
Give the case a clear path for air, with mounts for fans and a radiator. The Lian Li A3-mATX supports a 360mm radiator and up to 10 x 120mm fans, and the Cooler Master NR200P V3 takes top-mounted 240mm or 280mm radiators. The Lian Li A4-H2OX5 fits a 240mm AIO, and mesh panels on the bottom, sides and top feed it air. Leave space so cables stay clear of the fan mounts.
Fit the power supply and cables
Check the power supply size your case can hold before you build the mount. The Lian Li A3-mATX takes ATX, SFX and SFX-L power supplies, and the Lian Li A4-H2OX5 has a bracket for SFX and SFX-L power supplies. The Cooler Master NR200P V3 takes only an SFX power supply up to 130mm long. Route the cables away from fans and the graphics card so air keeps moving.
Assemble and check the fit
Shut the PC down and unplug it before you move parts into the case, and follow the manual for each part. Set the motherboard, graphics card and radiator in place and check that each one lines up with its mounts and that the panels close. If a part does not fit, adjust the mount or the panel before you connect power.
What you need

Lian Li A3-mATX PC Case
An mATX case with steel mesh panels, room for graphics cards up to 415mm, a 360mm radiator, and up to 10 x 120mm fans.
View on Amazon
Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5
A Mini-ITX case in an 11-liter sandwich layout with a triple-slot graphics card mount, a 240mm AIO, and a PCIe 5.0 riser cable.
View on Amazon
Fractal Design Terra Jade
A Mini ITX case at 10.4 L with a solid walnut front panel, room for graphics cards up to 322 mm, and a PCIe 4.0 riser cable.
View on Amazon
Cooler Master NR200P V3 Mini-ITX PC Case
A Mini-ITX case with a vertical graphics card mount for cards up to 361.5mm, a PCIe 5.0 riser cable, and 240mm or 280mm radiator support.
View on AmazonThese come from our ranked list Best ITX Case, which compares them spec by spec.
FAQ
What size should I build the case?
Match the case to the motherboard and the graphics card. Mini-ITX cases here run 10.4 L for the Fractal Design Terra Jade, 11 liters for the Lian Li A4-H2OX5, and 18.6L for the Cooler Master NR200P V3, while the mATX Lian Li A3-mATX is 26.3L.
Can I build a PC case from wood?
Yes, for panels. The Lian Li A3-mATX has a walnut wood front panel and the Fractal Design Terra Jade has a solid walnut front panel. Build the frame and mounts from a rigid material so the parts stay fixed in place.
Can I use a full-size ATX power supply?
It depends on the case. The Lian Li A3-mATX takes ATX, SFX and SFX-L power supplies, while the Cooler Master NR200P V3 takes only an SFX power supply up to 130mm long. Check the power supply size for your case before you buy.




