How to Build a Custom Gaming PC
Building a custom gaming PC means choosing each part yourself and fitting it into a case: the motherboard, processor, graphics card, memory, storage, power supply and cooling. Start by picking parts that fit together, then check them against the case you plan to use. The steps below walk through the order to follow, from planning to the first boot.
Pick parts that fit together
Choose a motherboard first, since it sets the processor socket, the memory type and the number of expansion slots. The case then has to take that board: the Lian Li A3 takes mATX and ITX boards, while the other three cases here take Mini-ITX boards. Check the memory type on the board against the memory you buy, DDR4 or DDR5, and check the requirements published for the games you plan to play.
Check the case fits your parts
Measure the graphics card against the case. The Lian Li A3 takes cards up to 415mm, the Cooler Master NR200P V3 takes cards up to 361.5mm, and the Fractal Design Terra takes cards up to 322mm. Check the cooler too: the A3 supports a 360mm radiator, the A4-H2O takes a 240mm AIO, and the NR200P V3 takes 240mm or 280mm radiators. Check the power supply type as well: the A3 takes ATX, SFX and SFX-L units, while the NR200P V3 takes SFX units up to 130mm.
Install the parts in order
Shut the PC down and unplug it before you open the case, and follow the maker's manual for each part. Fit the processor, memory and storage on the motherboard first, then mount the board in the case. Add the power supply, the graphics card and the cooler, and connect each cable to the port the manual names. The A4-H2O mounts its graphics card behind the motherboard on a PCIe 5.0 riser cable, so follow that case's manual for the riser.
Power on and set up
Plug the monitor, keyboard and mouse in, then switch the power supply on and press the case power button. Enter the BIOS or UEFI setup the manual describes and check that the parts you fitted are shown. Install the system software from the media the maker provides, then install the drivers for the motherboard and the graphics card from the makers' sites.
Keep airflow and cables clear
Mesh panels help air move through the case, and the A3 and the NR200P V3 both have mesh panels. Route cables away from fans so they keep airflow clear, and leave space around the graphics card and the cooler. Check the fan and radiator placement in the case manual: the A3 takes up to 10 120mm fans, and the Terra has a slidable central wall with 30mm of internal flexibility.
What you need

Lian Li A3-mATX PC Case
A 26.3L mATX case with room for a 415mm graphics card, a 360mm radiator and up to 10 120mm fans, with a walnut wood front panel.
View on Amazon
Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5
An 11-liter Mini-ITX case with a triple-slot graphics card mount, a 240mm AIO and a PCIe 5.0 riser cable in a sandwich layout.
View on Amazon
Fractal Design Terra Jade
A 10.4L Mini-ITX case with room for a 322mm graphics card, a PCIe 4.0 riser cable and a USB Type-C port on the front.
View on Amazon
Cooler Master NR200P V3 Mini-ITX PC Case
A Mini-ITX case with room for a 361.5mm graphics card, a 280mm radiator and a vertical graphics card mount with a PCIe 5.0 riser.
View on AmazonThese come from our ranked list Best ITX Case, which compares them spec by spec.
FAQ
What parts do I need to build a gaming PC?
You need a case, a motherboard, a processor, a graphics card, memory, storage, a power supply and cooling. Check the requirements published for the games you plan to play, and check that each part fits the case and the motherboard.
How do I know if a graphics card fits my case?
Compare the length of the card with the maximum the case states. The cases here state 415mm, 361.5mm and 322mm, so measure the card and check the case manual before you buy.
Do I need a big case for a gaming PC?
No. Small cases such as the 11-liter A4-H2O and the 10.4L Terra still hold a graphics card. Pick the case size from the parts you plan to fit, not from the size of the room.




