Amazon Black Friday Week deals

Paid link

Headsets · How-to guide

How Do Studio Headphones Work?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Studio headphones turn an electrical audio signal into sound you can hear. Inside each earcup, a driver moves a thin diaphragm back and forth, and that movement pushes air against your ear to make sound waves. Studio models are tuned to play the recording as it was mixed, with little added color of their own.

  1. How a driver turns signal into sound

    Every headphone earcup holds a driver, a small speaker made of a magnet, a coil of wire and a thin diaphragm. The audio signal from your device is an electric current that changes with the music, and it runs through the coil. The coil sits in the magnet's field, so the changing current pushes the coil and the diaphragm back and forth. That motion moves the air in the earcup, and the moving air is what your ear hears as sound. Bigger drivers can move more air, which is why driver size appears in the specs.

  2. Why studio sound stays flat and detailed

    Studio headphones are tuned for a flat response, which means they add as little bass or treble boost as possible and let you hear what is actually in the recording. That helps when you mix music, edit a podcast or check a recording for flaws, because a boosted headphone hides mistakes. The trade-off is that music can sound less lively than on consumer headphones built to make songs sound rich. If you only listen for fun, that flat tuning may feel plain at first.

  3. Closed backs, open backs and isolation

    Studio headphones for tracking use closed earcups, which seal around your ears and keep sound from leaking in or out. That matters when you record with a microphone nearby, since leaked sound ends up on the track. Open-back headphones leave the back of the earcup open so air moves freely, which can feel more natural for long mixing sessions, but they leak sound both ways. Check the earcup style before you buy, since it decides where the headphone works best.

  4. Connect them to the right source

    Studio headphones connect through a 3.5mm jack or USB, depending on the model. Plug the 3.5mm jack into your laptop, audio interface or console, and check that the port on your device carries audio before you blame the headphone. USB headsets carry their own digital signal, so they work wherever the device accepts a USB audio device. Start with the volume low, then raise it until the sound is comfortable, and keep the cable free of tangles so the plug stays seated.

What you need

Razer BlackShark V2 X Gaming Headset

Razer BlackShark V2 X Gaming Headset

A wired headset with 50 mm drivers, software-enabled 7.1 surround sound, memory foam cushions and a 3.5mm jack for PC, PS4, PS5 and Switch.

View on Amazon
Razer BlackShark V2 X Gaming Headset for PC

Razer BlackShark V2 X Gaming Headset for PC

The white version of the same headset, with 50 mm drivers, 7.1 surround sound, memory foam cushions and a bendable cardioid mic on a 3.5mm jack.

View on Amazon
HyperX Cloud III Wired Gaming Headset for PC

HyperX Cloud III Wired Gaming Headset for PC

A headset with angled 53 mm drivers, memory foam ear cushions, an aluminum frame and USB-C, USB-A and 3.5mm connections, plus a 10 mm mic with a mute indicator.

View on Amazon
BENGOO G9000 Stereo Gaming Headset for PS4 PC Xbox One PS5 Controller

BENGOO G9000 Stereo Gaming Headset for PS4 PC Xbox One PS5 Controller

A USB headset with 40 mm drivers, 7.1 surround sound, soft memory earmuffs, LED lights on the earcups and a rotary volume control on its braided cable.

View on Amazon

These come from our ranked list Best PC Headset, which compares them spec by spec.

FAQ

Do studio headphones need an amplifier?

Many run fine straight from a laptop or audio interface through a 3.5mm jack or USB connection. If the volume stays low with the output turned all the way up, check your device manual for a headphone amplifier.

What makes studio headphones different from regular headphones?

Studio headphones aim for a flat, uncolored sound so you hear the recording as it was mixed, while many consumer headphones boost bass and treble. Closed earcups also keep outside sound out while you listen.

Can I use studio headphones for gaming?

Yes. A headset with a microphone and a 3.5mm or USB connection works with a PC or console that accepts that connection. Check the headset notes for your console, since some need an adapter for an older controller.

Ranked headsets guides