Amazon Black Friday Week deals

Paid link

Headsets · How-to guide

How Do Noise-Cancelling Headphones Work?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Yes. Noise-cancelling headphones reduce outside noise even with no music playing. Small microphones on the earcups listen to the sound around you, and the headphones play an opposite sound wave that cancels much of it out.

  1. Microphones listen to the noise

    Each earcup carries microphones that pick up the sound outside the headphones. The soundcore Q20i pairs use two internal and two external microphones, the TOZO HT3 uses four microphones, and the bmani pair uses a four-layer hybrid system. These microphones feed the noise to a chip inside the headphones, which measures the sound and prepares the reply. The ear cushions also help by covering the ear and muffling some sound before it reaches you.

  2. The headphones answer with opposite sound

    The chip turns the measured noise into a mirror image sound wave, the exact opposite of the noise coming in. When the two waves meet, they cancel each other out, so less noise reaches your ear. This works best on steady, low sounds such as engine hum and office drone, and it works the same way whether music is playing or nothing is playing. The soundcore Q20i pairs reduce up to 90% of outside noise this way, and the bmani pair lists up to 45 dB of reduction.

  3. ANC runs without music

    Noise cancelling is a separate circuit from music playback, so it keeps working when you pause the music or play nothing at all. You only need the headphones switched on with ANC switched on; nothing needs to be playing. The battery powers the microphones and the chip, so ANC stops when the battery runs out. The soundcore Q20i pairs run for 40 hours with ANC on, while the TOZO HT3 lists up to 90 hours of playback and the bmani pair lists up to 120 hours of playback.

  4. What ANC does not remove

    Noise cancelling does not remove every sound. Sudden sharp sounds and nearby voices still get through, though quieter than without ANC, and the fit of the earcups decides how much sound leaks in around the seal. If you need to hear announcements or traffic, switch to Transparency mode, which the soundcore Q20i pairs and the bmani pair both list, and the microphones pass outside sound through instead of cancelling it.

What you need

soundcore by Anker Q20i Hybrid Active Noise Cancelling Headphones

soundcore by Anker Q20i Hybrid Active Noise Cancelling Headphones

A black over-ear pair with hybrid ANC from two internal and two external microphones, 40 mm drivers, Bluetooth 5.0 and 40 hours of playtime with ANC on.

View on Amazon
Soundcore by Anker Q20i Hybrid Active Noise Cancelling Headphones

Soundcore by Anker Q20i Hybrid Active Noise Cancelling Headphones

A taupe over-ear pair with hybrid ANC from two internal and two external microphones, 40 mm drivers, Bluetooth 5.0 and 40 hours of playtime with ANC on.

View on Amazon
TOZO HT3 Hybrid Noise Cancelling Wireless Headphones

TOZO HT3 Hybrid Noise Cancelling Wireless Headphones

A foldable over-ear pair with hybrid ANC from four microphones and up to 45 dB of reduction, 40 mm drivers, Bluetooth 6.0 and 90 hours of playtime.

View on Amazon
Hybrid Active Noise Cancelling Headphones

Hybrid Active Noise Cancelling Headphones

An over-ear pair with hybrid ANC and up to 45 dB of reduction, six microphones, 40 mm drivers, Bluetooth 6.0, 120 hours of playtime and a 5-year warranty.

View on Amazon

These come from our ranked list Best Noise Cancelling Headphones for PC, which compares them spec by spec.

FAQ

Do noise-cancelling headphones work with no music playing?

Yes. The microphones and the chip keep cancelling outside noise even when nothing is playing, so the noise cancelling keeps working on its own. Just switch the headphones on and turn ANC on.

Do noise-cancelling headphones need battery power?

Yes. The microphones and the chip that make the cancelling sound need power, so ANC runs on the battery. When the battery runs out, the cancelling stops, though the earcups still muffle some sound by covering your ears.

Can I hear announcements with noise cancelling on?

Switch to Transparency mode, which passes outside sound through the headphones so you can hear announcements and traffic. The soundcore Q20i pairs and the bmani pair both list this mode, and you switch back to ANC when you want the cancelling back.

Ranked headsets guides