Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

Common PC Fan Sizes Explained

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A PC fan size is the width of the fan in millimeters, and the case you own decides which sizes fit. The A3 states 120mm fans, and radiators here run from 240mm to 360mm, so check the mounts your case lists before you buy. The sections below explain what the size means and how to match a fan to a case.

  1. What fan size means

    Fan size is the width of the fan from one edge to the other, measured in millimeters. A 120mm fan is 120mm across, and the screw holes on the fan line up with mounts made for that size. A fan that is wider than its mount will not fit, and a fan that is narrower will leave gaps around the mount. Read the size in millimeters before you buy a fan.

  2. The 120mm fan in these cases

    The Lian Li A3 states up to 10 120mm fans, the one fan size this lineup states by name. For radiators, the A3 supports a 360mm radiator, the A4-H2O takes a 240mm AIO, and the NR200P V3 takes 240mm or 280mm radiators. A radiator size in millimeters is the length of the radiator, not a fan size, so read the radiator figure and the fan figure as two different numbers.

  3. Match the fan to the mount

    Check the mounts in your case before you buy fans. The A3 lists mounts for up to 10 120mm fans, so a 120mm fan fits those mounts. For the other cases, read the manual for the fan mounts it lists: the Terra has a slidable central wall with 30mm of internal flexibility, and the NR200P V3 has a vented mesh side panel and a top mount for radiators. A fan that matches the mount size screws in without forcing.

  4. Shut down before you fit a fan

    Shut the PC down and unplug it before you open the case, and follow the maker's manual for fitting the fan. Hold the fan by its frame, line its screw holes up with the mount, and fix it with screws that fit the mount. Check that the fan spins freely and that no cable touches the blades. Then close the case, plug the PC in, and switch it on.

What you need

Lian Li A3-mATX PC Case

Lian Li A3-mATX PC Case

A 26.3L mATX case that takes up to 10 120mm fans and a 360mm radiator, with steel mesh side and top panels.

View on Amazon
Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5

Lian Li A4-H2OX5 Mini-ITX Case-SFX Layout-PCIe 5.0 Riser-Black-A4H2OX5

An 11-liter Mini-ITX case that takes a 240mm AIO, with a triple-slot graphics card mount and a PCIe 5.0 riser cable.

View on Amazon
Fractal Design Terra Jade

Fractal Design Terra Jade

A 10.4L Mini-ITX case with a slidable central wall, a USB Type-C port and room for a 322mm graphics card.

View on Amazon
Cooler Master NR200P V3 Mini-ITX PC Case

Cooler Master NR200P V3 Mini-ITX PC Case

A Mini-ITX case that takes 240mm or 280mm radiators, with a vertical graphics card mount and a PCIe 5.0 riser.

View on Amazon

These come from our ranked list Best ITX Case, which compares them spec by spec.

FAQ

What is the most common PC fan size?

The Lian Li A3 states 120mm fans and takes up to 10 of them. Check the mounts your case lists, since the fan size has to match the mount.

How do I know what fan size my case takes?

Read the case manual or the fan sizes the case lists. The A3 lists up to 10 120mm fans, and the NR200P V3 lists 240mm or 280mm radiators. Measure the mount if the manual does not give a size.

Can I put a bigger fan in a smaller mount?

No. A fan has to match the mount size, or it will not screw in. Check the size in millimeters on the fan and on the mount before you buy.

Ranked pc cases guides