Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

What Is a Full-Modular PSU?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A full-modular PSU is a power supply where every cable detaches from the unit, including the main motherboard cable and the cables for the processor and graphics card. You connect only the cables your build uses and leave the rest out of the case. That keeps unused cables out of the airflow path and makes cable routing simpler.

  1. What full-modular means

    In a full-modular power supply, every cable plugs into the unit and can be removed, from the main motherboard cable to the cables that feed the processor, drives and graphics card. You attach only the cables your build needs, so spare cables stay in the box instead of inside the case. Fewer loose cables leave more room for air to move and make the inside of the case easier to keep tidy. When you change parts later, you can swap a cable without replacing the whole unit.

  2. Match the wattage to your parts

    The wattage on the box is the total power the unit is rated to supply. Check the power figure listed for each part in your build, then compare it with that rating before you buy. The units shown here carry 750 W, 850 W and 1000 W ratings, so you can pick the rating that fits the parts you plan to run. A unit with headroom above your parts' listed figures leaves room for parts you add later.

  3. Check the connectors your build uses

    A graphics card and a motherboard each take their own connectors, so check the cables in the box against the parts you own. The four units shown here each include a native 12V-2x6 connector for newer graphics cards, and the Pure Power 13 M 1000W also lists four PCIe 6+2-pin connectors for current graphics cards. All four are ATX 3.1 units with PCIe 5.1 support. Count the connectors your parts need before you choose.

  4. Read the efficiency rating and warranty

    An efficiency rating describes how much of the power drawn from the wall reaches your parts instead of turning into heat. The Pure Power 13 M 1000W and the MSI MAG A750GL PCIE5 carry an 80 PLUS Gold rating, the CORSAIR RM1000x carries a Cybenetics Gold rating, and the Pure Power 13 M 1000W also carries a Cybenetics Platinum rating. Warranty terms differ too: the CORSAIR RM850e carries a 7-year warranty, while the other three units carry a 10-year warranty.

What you need

CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

A 1000 W fully modular unit with a native 12V-2x6 connector, ATX 3.1 and PCIe 5.1 support, and a 10-year warranty.

View on Amazon
be quiet! Pure Power 13 M 1000W Power Supply

be quiet! Pure Power 13 M 1000W Power Supply

A 1000 W fully modular unit with 80 PLUS Gold and Cybenetics Platinum ratings, a native 12V-2x6 connector, and a semi-passive fan.

View on Amazon
CORSAIR RM850e ATX 3.1 PCIe 5.1 Ready 850W Power Supply

CORSAIR RM850e ATX 3.1 PCIe 5.1 Ready 850W Power Supply

An 850 W fully modular unit with a native 12V-2x6 cable, ATX 3.1 and PCIe 5.1 support, and a 7-year warranty.

View on Amazon
MSI MAG A750GL PCIE5

MSI MAG A750GL PCIE5

A 750 W fully modular unit with an 80 PLUS Gold rating, ATX 3.1 and PCIe 5.1 support, and a 10-year warranty.

View on Amazon

These come from our ranked list Best Modular Power Supply, which compares them spec by spec.

FAQ

Is a full-modular PSU better than a non-modular one?

It gives you tidier cable routing because you connect only the cables you use. A non-modular unit keeps all its cables attached, so spare cables stay inside the case. Either type powers the same parts when the wattage and connectors match.

Can I use cables from another power supply?

No. Cables from one power supply do not always fit another, even from the same brand, and the wrong cable can damage parts. Use only the cables that came with your unit, and keep spares from the same box together.

What wattage should I choose for my build?

Check the power figure listed for each part in your build and compare the total with the wattage on the PSU. The units shown here range from 750 W to 1000 W. If you plan to add parts later, a higher wattage leaves more room.

Ranked power supplies guides