Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Replace a PC Power Supply

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To replace a PC power supply, shut the PC down, unplug it from the wall, and open the case following the PC maker's manual. Remove the old unit, fit the new one in its place, and reconnect each cable to the same part it came from. Then close the case, plug the PC back in, and switch it on.

  1. Shut down and unplug the PC

    Shut the PC down through the operating system, then unplug the power cable from the wall and from the back of the PC. Follow the PC maker's manual to open the case. If the PC or the old power supply is still under warranty, contact the maker instead of opening the case yourself. Never open the power supply unit itself: the swap means replacing the whole unit, not repairing it.

  2. Record how the old unit connects

    Before you remove anything, look at where each cable from the old unit goes and write it down or take a photo. The cables run to the motherboard, the processor, the graphics card, and the drives. Note which cable plugs into each part so the new unit's cables go back to the same places. Keep the screws you remove in one place.

  3. Remove the old power supply

    Unplug each cable from the motherboard, the processor, the graphics card, and the drives, pulling each connector straight out by its housing. Undo the screws that hold the unit to the case and slide the unit out. Set the old unit aside with its cables. Do not open the unit or touch anything inside it.

  4. Fit the new unit and connect the cables

    Slide the new unit into the same mounting position and fasten it with screws. Connect each cable to the part it serves: the motherboard, the processor, the graphics card, and the drives. Use only the cables that came with the new unit, and push each connector in until it seats. Check that no cable is loose before you close the case.

  5. Check the connections and power on

    Look over every connection once more and check that each cable is seated and that no cable sits in front of a fan. Close the case, plug the power cable back in, and switch the PC on. If the PC starts and the fans spin, the swap is done. If it does not start, shut it down, unplug it, and check the connections again.

What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

A 1000W fully modular unit with ATX 3.1 and PCIe 5.1 support, a native 12V-2x6 cable, a 120mm fan, and a 7-year manufacturer warranty.

View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

A 1000W fully modular unit with ATX 3.1 and PCIe 5.1 support, a native 12V-2x6 connector, Cybenetics Gold efficiency up to 91%, and a 10-year manufacturer warranty.

View on Amazon
MSI MAG A850GL PCIE5

MSI MAG A850GL PCIE5

An 850W fully modular unit with 80 PLUS GOLD, ATX 3.1 and PCIe 5.1 support, a native dual-color 12V-2x6 cable, and a 10-year limited warranty.

View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

An 850W fully modular unit with 80 PLUS Gold efficiency up to 90%, ATX 3.1 and PCIe 5.1 support, a native 450W 12V-2x6 connector, and a 5-year manufacturer warranty.

View on Amazon

These come from our ranked list Best Power Supply, which compares them spec by spec.

FAQ

Can I reuse the cables from my old power supply?

No. Use only the cables that came with the new unit, since modular cables are wired for their own unit. Keep the old cables with the old unit.

How do I know the new unit fits my case?

Check the size and mounting the case manual lists for a power supply, and check that the new unit's cables match the parts in the PC.

What should I do if the PC does not start after the swap?

Shut it down, unplug it, and check that each cable is seated, then try again; if it still does not start, contact the maker.

Ranked power supplies guides