What Is a Linear Power Supply?
A linear power supply turns wall AC into steady DC by passing it through a transformer, a rectifier and a regulator that burns off the extra voltage as heat. The output is smooth and steady, which suits gear that needs clean power, but the design runs hot and stays large and heavy next to a switching supply.
How a linear supply works
Mains AC first passes through a transformer that steps the voltage down, then through a rectifier that turns AC into pulsing DC. A regulator then holds the output at a steady level by dropping the extra voltage, and that dropped voltage leaves as heat. A large capacitor smooths the output further, so the DC that reaches your gear stays steady even as the load changes. That is why a linear supply feels heavy for its power: the transformer and the heat sink do the work.
Linear against switching
A switching supply chops the input on and off at high speed and filters the result, so it stays small, light and cool for the same wattage. A linear supply holds its output steady through a regulator, so its output carries less ripple and less electrical noise, which is why it is picked for audio gear, lab benches and other sensitive equipment. The trade is size, weight and heat: the linear design wastes the extra voltage as heat, while the switching design converts more of the input into useful output. Pick the type that matches the gear, not the one that looks newer.
Read the wattage and the cables
Wattage is the headline figure on a power supply: the two CORSAIR units here are rated at 1000W and the MSI and Thermaltake units at 850W. Check the figure against the parts in your build, and check the connectors too: all four units here are fully modular and carry a native 12V-2x6 connector for modern graphics cards. Fully modular means you connect only the cables your build needs, which keeps the case tidy. Match the wattage and the connectors to your parts before you buy.
Heat, noise and warranty
A power supply makes heat and noise. The CORSAIR RM1000e uses a 120mm rifle bearing fan with a fan curve that keeps noise down at full load, and the Thermaltake uses Smart Zero Fan technology that adjusts fan speed with load. The RM1000x is rated for up to 91% efficiency and the Thermaltake for up to 90% efficiency. Warranties run from 5 years on the Thermaltake to 10 years on the RM1000x and the MSI unit, with 7 years on the RM1000e.
What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply
A 1000W ATX 3.1 power supply, fully modular, with a native 12V-2x6 cable, a 120mm fan and a 7-year warranty.
View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply
A 1000W ATX 3.1 power supply, fully modular, with a native 12V-2x6 connector, up to 91% efficiency and a 10-year warranty.
View on Amazon
MSI MAG A850GL PCIE5
An 850W fully modular power supply, 80 PLUS Gold, ATX 3.1 and PCIe 5.1 ready, with a native 12V-2x6 cable and a 10-year warranty.
View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply
An 850W ATX 3.1 power supply, fully modular, 80 PLUS Gold, with Smart Zero Fan, a native 12V-2x6 connector and a 5-year warranty.
View on AmazonThese come from our ranked list Best Power Supply, which compares them spec by spec.
FAQ
Is a linear power supply better than a switching one?
It depends on the gear. A linear supply gives smooth output with less ripple and noise, which suits sensitive equipment, while a switching supply stays smaller, lighter and cooler for the same wattage.
Why do linear power supplies run hot?
The regulator drops the extra voltage to hold a steady output, and the dropped voltage leaves as heat. That heat needs a heat sink and airflow, which is why the design stays large and heavy.
What wattage and connectors should I check?
Check the wattage against the parts in your build: the two CORSAIR units here are rated at 1000W and the MSI and Thermaltake units at 850W. All four are fully modular with a native 12V-2x6 connector for modern graphics cards.




