Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

What Is a Hot-Plug Power Supply?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A hot-plug power supply is a power supply you can remove and replace while the system keeps running. Servers built for hot-plug have a bay and connectors that let a supply slide in and out without shutting the system down. Desktop PCs use a different kind of supply, so check the maker's manual before you swap one.

  1. What hot-plug means

    A hot-plug power supply is built to slide in and out of a powered system without shutting it down. The bay has connectors that meet the supply as it slides in, and a latch holds it in place. When a supply fails, you pull it out and slide in a spare, and the system keeps running on the supply that stays in place. This design belongs in servers and storage systems that must stay on while parts are replaced.

  2. How redundant supplies share the load

    Many hot-plug systems run with a spare supply fitted alongside the one in use, so the load is shared and one supply can carry the system if the other fails. If a supply fails, the system reports it with a warning light or a message, and the remaining supply keeps the system running. Replace the failed unit promptly so the system has a spare again. Check the maker's manual for how your system reports a failed supply.

  3. Hot-plug is not the same as modular

    A fully modular supply lets you detach the cables you do not need, which keeps cable management tidy inside the case. That is not the same as hot-plug: a modular supply still comes out only with the system off, unless the system is built for hot-plug. The four supplies shown here are fully modular desktop ATX supplies. Check the maker's manual before you remove any supply from a running system.

  4. How to swap a hot-plug supply

    First, read the maker's manual for your system and confirm it supports hot-plug swaps. Get a spare that matches the failed supply and the bay it fits. Release the latch, slide the failed supply straight out, and slide the spare in until the latch catches. Watch for the indicator that shows the new supply is in place and running. For a desktop PC, shut it down and unplug it first, since a standard desktop supply is not built for live swaps.

  5. Signs a supply needs replacing

    A supply that needs replacing often shows itself before it stops: the system reports a failed supply, a warning light comes on, the fan runs loud or stops, or the system restarts without a clear cause. Treat any of these as a sign to check the maker's manual and the system logs. Replace a failed supply promptly, so the system keeps a spare fitted alongside the supply in use.

What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

A 1000W fully modular ATX 3.1 power supply with a native 12V-2x6 cable, a 120mm rifle bearing fan and 105-degree rated capacitors.

View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

A 1000W fully modular ATX 3.1 power supply with a native 12V-2x6 connector, Cybenetics Gold efficiency and a 10 year warranty.

View on Amazon
MSI MAG A850GL PCIE5

MSI MAG A850GL PCIE5

An 850W fully modular ATX 3.1 power supply, 80 PLUS Gold certified, with a native dual-color 12V-2x6 cable and a 10 year warranty.

View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

An 850W fully modular ATX 3.1 power supply, 80 PLUS Gold, with Smart Zero Fan, a native 450W PCIe 5.1 connector and a 5 year warranty.

View on Amazon

These come from our ranked list Best Power Supply, which compares them spec by spec.

FAQ

Can I hot-plug a desktop PC power supply?

No, not a standard desktop supply. Shut the PC down and unplug it first, then follow the maker's manual to replace it. Only a system built for hot-plug lets you swap a supply while it runs.

Do hot-plug supplies need matching spares?

Yes. Use a spare that matches the failed supply and the bay it fits, and follow the maker's manual. A spare that does not match may not fit the bay or the connectors.

What happens if a redundant supply fails?

The other supply keeps the system running, and the system reports the failure so you can swap the failed unit. Replace it promptly so the system has a spare again.

Ranked power supplies guides