Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

What Is a Dual-Rail Power Supply?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A dual-rail power supply splits its 12 volt output into two separate rails, each feeding a different set of parts in the computer. One rail can feed the processor and the motherboard, while the other feeds the graphics card and drives. Each rail has its own current limit, so one rail cannot draw more than its limit.

  1. How two rails share the load

    A power supply takes wall power and turns it into the low voltage rails the parts use, with the 12 volt rail carrying most of the load. In a dual-rail unit, that 12 volt output is split into two rails, and each rail feeds its own set of cables. The split is fixed by the maker, and each rail feeds its own set of cables. Check which connectors belong to each rail before you plug cables in, so each part gets power from the rail the maker assigned to it.

  2. Dual rail and single rail

    A single-rail unit puts the whole 12 volt output on one rail with one current limit, while a dual-rail unit divides it in two. The Thermaltake Toughpower GT in this guide states a high amperage single +12V rail, so it is a single-rail unit, not a dual-rail one. Neither layout is better on its own: with one rail, a graphics card can draw what it needs without tripping a per-rail limit, while with two rails, each side has its own limit. Compare the rail figures for the units you are choosing between.

  3. Check the rails before you buy

    The wattage on the box is not the whole story. Look at the 12 volt rails on the unit: how many rails it has, and the current limit for each one. Compare those figures with the requirements published for your processor and graphics card, and check the connectors the unit includes, such as the native 12V-2x6 cable included with the Corsair RM1000e here and the native 12V-2x6 connector on the Corsair RM1000x. A unit that fits the case and has the cables you need saves a return trip.

  4. Shut down before you open the case

    A power supply holds mains voltage even when the computer is off, so treat it with care. Shut the computer down and unplug it first, then follow the maker's manual for the swap. Do not open the power supply unit itself, and do not repair it: contact the maker if it fails. If the unit is still under warranty, opening it can void the cover, so leave the unit sealed.

What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

A 1000W fully modular unit with a native 12V-2x6 cable, a 120mm rifle bearing fan and a 7 year warranty.

View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

A 1000W fully modular unit rated up to 91% efficiency, with a native 12V-2x6 connector and a 10 year warranty.

View on Amazon
MSI MAG A850GL PCIE5

MSI MAG A850GL PCIE5

An 850W fully modular unit with 80 PLUS Gold certification, ATX 3.1 and PCIe 5.1 support and a 10 year warranty.

View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

An 850W fully modular unit with a single +12V rail, 80 PLUS Gold efficiency and a 5 year warranty.

View on Amazon

These come from our ranked list Best Power Supply, which compares them spec by spec.

FAQ

Is a dual-rail power supply better than single-rail?

Neither is better on its own. A single rail never trips a per-rail limit, while two rails limit how much current one side can draw. Choose by the rail figures and the requirements published for your parts.

How do I know if my power supply is dual rail?

Check the 12 volt rails the unit has: two 12 volt rails mean a dual-rail unit, while one means a single rail. The Thermaltake unit here has a high amperage single +12V rail.

Can a dual-rail supply power a graphics card?

Yes, if the card's connectors match the rails and the published requirements for your card are met. Check the native 12V-2x6 cable included with the Corsair RM1000e here, and the connector list for the unit you buy. Do not guess at the wattage: check the figures published for your card.

Ranked power supplies guides