Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

What Is a Dual Power Supply?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A dual power supply is a PC with two power supply units instead of one, so the load is split between two units. One unit can feed the graphics card while the other feeds the rest of the system, or the second unit can stand by as a spare. It is a way to add capacity or backup power when a single unit cannot cover the build.

  1. Two units, one system

    In a dual power supply setup, two separate units sit in the same PC and share the work of feeding power to the parts. Each unit plugs into the wall on its own and feeds the parts wired to it, so the system draws from two sources instead of one. The two units do not merge into a single larger unit; they stay separate, and the wiring decides which parts each one feeds.

  2. How the load is split

    A common split puts the graphics card on one unit and the motherboard, storage and fans on the other, since the graphics card draws the most power. Each unit must have the connectors its parts need, such as the native 12V-2x6 connector that all four units in the list below carry. Check the connector list for each unit against the parts you plan to wire to it before you buy.

  3. When a second unit helps

    A second unit adds capacity when the parts in the build draw more than one unit supplies, and it adds backup when one unit is set up to take over if the other stops. Without that backup wiring, a failed unit still stops the parts it feeds, so redundancy comes from the setup, not from having two boxes in the case. Decide first whether you want more capacity, backup, or both.

  4. What to check before adding one

    Check that the case has room and mounting for a second unit, and that each unit has the connectors and wattage for the parts it will feed. The units below are 1000W and 850W models, all ATX 3.1 and PCIe 5.1 ready with fully modular cabling, so compare their figures with the requirements published for your parts. Shut the PC down and unplug it before you open the case, and follow the maker's manual. Do not open or repair a power supply; contact the maker if one fails.

What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

A 1000W fully modular ATX 3.1 power supply with a native 12V-2x6 cable, a 120mm rifle bearing fan and a 7-year manufacturer warranty.

View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

A 1000W fully modular ATX 3.1 power supply with a native 12V-2x6 connector, Cybenetics Gold rated up to 91% efficiency and a 10-year manufacturer warranty.

View on Amazon
MSI MAG A850GL PCIE5

MSI MAG A850GL PCIE5

An 850W fully modular 80 PLUS Gold power supply, ATX 3.1 and PCIe 5.1 ready, with a native dual-color 12V-2x6 cable and a 10-year limited warranty.

View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

An 850W fully modular 80 Plus Gold power supply with a native 450W PCIe 5.1 connector, Smart Zero Fan and a 5-year manufacturer warranty.

View on Amazon

These come from our ranked list Best Power Supply, which compares them spec by spec.

FAQ

Is a dual power supply the same as a redundant power supply?

A redundant setup is one kind of dual setup: the second unit takes over if the first fails. A split-load setup uses both units at once instead. Both use two units in one PC, so check which kind the wiring provides.

Can two different power supplies share one PC?

They can split the load, but each unit must have the connectors its parts need, such as the native 12V-2x6 connector on the four units below. Check the manual for each unit and for the case before wiring them in.

Do I need a dual power supply for one graphics card?

A single unit can be enough. The CORSAIR units below are 1000W and the MSI and Thermaltake units are 850W, so compare the figures on your parts with the wattage of one unit before adding a second.

Ranked power supplies guides