Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

What Does 80 Plus Mean on a PSU?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

The '80' in 80 Plus refers to an efficiency certification for power supplies. A certified unit converts at least 80% of the power it draws from the wall into power your parts can use, instead of losing it as heat. Higher tiers such as Gold mean less wasted power, less heat and a quieter fan under load.

  1. What 80 Plus measures

    80 Plus measures how much of the power a supply pulls from the wall actually reaches your parts. The rest leaves as heat, so a more efficient supply keeps more of the power for your parts and its fan spins less often. The rating is shown as a tier: Standard, Bronze, Silver, Gold, Platinum and Titanium, with each step marking a more efficient design. A Gold rating sits above Bronze and Silver, so Gold units waste less power than lower tiers at the same load.

  2. How the rating is measured

    An independent lab measures the supply at several loads and records how much power reaches the parts at each one. The result decides which tier the supply earns, and the maker lists that tier on the box. Cybenetics is a separate lab that also rates supplies; the CORSAIR RM1000e and RM1000x carry a Cybenetics Gold rating, while the MSI MAG A850GL and the Thermaltake Toughpower GT carry 80 Plus Gold.

  3. Why efficiency matters in your build

    A supply that wastes less power gives off less heat inside the case, which helps the rest of the system stay cool. It also draws less power from the wall for the same parts, so the fan can run slower and quieter. The rating says nothing about wattage, so check the wattage your parts need separately and match it to the supply.

  4. Choosing a rated supply

    Pick the wattage first, using the requirements published for your graphics card and processor, then pick the highest efficiency tier that fits your build. A Gold-rated supply is a solid middle ground, while the tiers above it add a smaller gain in efficiency. Check the rating on the listing itself, and look for a fully modular design if you want to connect only the cables your build needs.

What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

A 1000 W fully modular supply with a 120 mm rifle bearing fan, 105°C-rated capacitors and a 7-year warranty, rated Cybenetics Gold.

View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

A 1000 W fully modular supply rated for up to 91% efficiency, with a native 12V-2x6 connector and a 10-year warranty.

View on Amazon
MSI MAG A850GL PCIE5

MSI MAG A850GL PCIE5

An 850 W fully modular supply with an 80 Plus Gold rating, ATX 3.1 and PCIe 5.1 support, and a 10-year limited warranty.

View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

An 850 W fully modular supply with 80 Plus Gold efficiency up to 90%, Smart Zero Fan and a 5-year warranty.

View on Amazon

These come from our ranked list Best Power Supply, which compares them spec by spec.

FAQ

Does a higher 80 Plus tier mean more wattage?

No. The tier measures efficiency, not how much power the supply can deliver. Check the wattage your parts need and the tier separately when you compare supplies.

Is an 80 Plus Gold supply enough for a gaming PC?

The tier alone does not answer that. Add up the wattage published for your graphics card and processor, then pick a supply with enough wattage at the tier you want.

Do all power supplies carry an 80 Plus rating?

No. Some supplies are sold without a rating, and a rating is only one part of the picture. Check the rating, the wattage and the warranty before you buy.

Ranked power supplies guides