Types of PC Power Supplies
A PC power supply turns wall power into the low-voltage direct current your parts use, and its type is set by wattage, size, cable layout and efficiency rating. The common desktop type is the ATX unit, and current models follow the ATX 3.1 standard with a 12V-2x6 connector for newer graphics cards. Choose by matching the unit to your case, your parts and the cables your build uses.
Wattage and what it covers
Wattage is the total power the unit can deliver to your parts. A higher wattage figure gives more headroom for parts that draw more power, while a lower figure suits a build with fewer parts that draw less. Add up the power figures listed for your processor and graphics card, then check the figures published for those parts and pick a unit that covers them with room to spare.
Modular, semi-modular and fixed cables
In a fully modular unit, every cable detaches from the unit, so you connect only the cables your build uses and leave the rest out of the case. Semi-modular units keep the main cables fixed and let the rest detach. Fixed-cable units keep all cables attached, which leaves unused cables to route inside the case. Use only the cables that came with the unit, since cables from another unit may not match.
Efficiency ratings and ATX standards
Efficiency ratings such as 80 PLUS Gold describe how much of the power drawn from the wall reaches your parts, with the rest lost as heat. A higher rating wastes less power as heat. The ATX 3.1 standard covers how the unit handles short spikes in power draw from a graphics card, and PCIe 5.1 units carry a native 12V-2x6 connector, so newer graphics cards connect without an adapter. Check that the unit lists the standard and connector your graphics card uses.
Fit, cooling and fan clearance
Check the unit's size against your case before buying, and check that its fan and vents have clear air. Shut the computer down and unplug it before you install or remove a power supply, and follow the maker's manual for the steps. Never open the power supply unit itself, and if a unit is faulty or under warranty, contact the maker instead of trying to repair it.
What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply
A 1000W fully modular unit with a native 12V-2x6 cable, ATX 3.1 and PCIe 5.1 support, a 7-year warranty and a low-noise fan.
View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply
A 1000W fully modular unit with a native 12V-2x6 connector, ATX 3.1 support, Cybenetics Gold efficiency and a 10-year warranty.
View on Amazon
MSI MAG A850GL PCIE5
An 850W fully modular unit with 80 PLUS Gold certification, ATX 3.1 and PCIe 5.1 support, a native 12V-2x6 cable and a 10-year warranty.
View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply
An 850W fully modular unit with 80 PLUS Gold efficiency, ATX 3.1 support, a native 12V-2x6 connector, Smart Zero Fan and a 5-year warranty.
View on AmazonThese come from our ranked list Best Power Supply, which compares them spec by spec.
FAQ
What wattage power supply should I choose?
Match the wattage to the figures published for your processor and graphics card, and pick a unit that covers them with room to spare. A unit with a higher wattage figure does not use more power on its own, since the parts draw only what they use.
Are fully modular power supplies better?
They make cable routing simpler, since you connect only the cables your build uses. A fixed-cable unit works the same way for power delivery, so the choice comes down to how tidy you want the inside of the case to be.
Do I need an ATX 3.1 power supply?
You need one only if your graphics card uses the 12V-2x6 connector or your parts list ATX 3.1. Older graphics cards use older connectors, so check the connector your card lists and the standard your parts list before you buy.




