Power Supply Adapter Types Explained
A power supply adapter is the box inside a desktop PC that turns wall power into the low-voltage power the parts use. The main types are ATX power supplies, which differ by wattage, cable type, and the connectors they carry, including the 12V-2x6 connector for modern graphics cards. Match the wattage and connectors to the parts in your build, and check the requirements the part makers publish.
What a power supply does
A power supply takes power from the wall outlet and sends it to the motherboard, the graphics card, storage drives and fans through separate cables. The motherboard, the processor and the graphics card each take their own cables, and the 12V rail carries most of the power in the system. The single +12V rail in the Thermaltake Toughpower GT 850W is one example of that design, and it feeds high-end gaming and workstation builds.
Wattage and the ATX 3.1 standard
Wattage is the total power the supply can deliver, and the supplies here run at 850W or 1000W. The ATX 3.1 standard covers how a supply handles short power spikes from a graphics card: the CORSAIR RM1000e withstands 2x transient power excursions from the GPU, and the RM1000x resists transient power spikes. Add up the wattage the makers of your processor and graphics card list for their parts, and pick a supply that covers that total with room to spare.
Modular cables and the 12V-2x6 connector
A fully modular supply lets you connect only the cables your build needs, which keeps spare cables out of the case. All four supplies here are fully modular. Modern graphics cards use the 12V-2x6 connector, and each supply here carries a native 12V-2x6 cable or connector, so no adapter is needed between the supply and the card. The Thermaltake Toughpower GT 850W lists a native 450W PCIe 5.1 connector for that card.
Efficiency, noise and installing the supply
The 80 PLUS Gold rating marks supplies that waste less power as heat. The CORSAIR RM1000x is rated for up to 91% efficiency and the Thermaltake Toughpower GT 850W for up to 90%. Fans keep the supply cool: the RM1000e uses a 120mm rifle bearing fan, and the Toughpower GT uses Smart Zero Fan, which adjusts fan speed with load. Before you install a supply, shut the PC down, unplug it, and follow the maker's manual. Never open the supply itself; if it fails, contact the maker.
What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply
A 1000W fully modular ATX 3.1 supply with a native 12V-2x6 cable, a 120mm fan, and a 7-year warranty.
View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply
A 1000W fully modular ATX 3.1 supply with a native 12V-2x6 connector, rated for up to 91% efficiency and a 10-year warranty.
View on Amazon
MSI MAG A850GL PCIE5
An 850W fully modular ATX 3.1 and PCIe 5.1 supply with 80 PLUS Gold, a native dual-color 12V-2x6 cable, and a 10-year warranty.
View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply
An 850W fully modular ATX 3.1 supply with 80 PLUS Gold, a native 450W PCIe 5.1 connector, Smart Zero Fan, and a 5-year warranty.
View on AmazonThese come from our ranked list Best Power Supply, which compares them spec by spec.
FAQ
What does ATX 3.1 mean on a power supply?
It is the Intel power standard the supply follows. It covers how the supply handles short power spikes from a graphics card, so a supply that lists ATX 3.1 is built for modern graphics cards.
Do I need a fully modular power supply?
No. A fully modular supply lets you connect only the cables your build needs, which keeps spare cables out of the case. A non-modular supply has its cables fixed, so check how much room your case has for spare cables.
What is the 12V-2x6 connector for?
It connects a modern graphics card straight to the power supply. The CORSAIR RM1000x and the Thermaltake Toughpower GT 850W each carry a native 12V-2x6 connector, and the CORSAIR RM1000e and the MSI MAG A850GL PCIE5 each include a native 12V-2x6 cable.




