PC Power Supply Connector Types Explained
A PC power supply connects to each part of your computer with a cable, and each connector has a shape and pin layout that fits only its matching socket. The connectors are the 24-pin motherboard cable, the 8-pin CPU cable, the PCIe cables for the graphics card, and the SATA cables for drives. Match each cable to its socket and never force one that does not fit.
The 24-pin motherboard connector
The 24-pin cable powers the motherboard itself. It plugs into the long socket along the edge of the board, and its clip lines up with a tab on the socket so it only seats one way. On a fully modular supply, this cable plugs into the matching 24-pin port on the power supply too. Push it in until the clip clicks, and check that it sits flat before you power on.
The CPU power connector
The CPU gets its own cable, an 8-pin connector near the top of the motherboard, close to the processor socket. Some boards have a second 8-pin or 4-pin socket beside it. Check your motherboard manual to see which sockets your board has and fill the main one first. This cable looks similar to a PCIe cable, so use the 8-pin cable that fits the CPU socket near the top of the motherboard.
Graphics card power connectors
Graphics cards draw power through PCIe cables, such as a 6-pin or 6+2-pin connector, and some newer cards use a 12V-2x6 connector instead. A 6+2-pin cable splits so it fits either a 6-pin or an 8-pin socket. Check the sockets on your graphics card and use one cable per socket where the card has more than one. Seat each connector fully until its clip locks, since a loose connector can stop the card from starting.
SATA and Molex drive connectors
Drives and some fans use flat SATA power connectors, which slide onto the matching port on a hard drive or solid state drive. Older fans, hubs and accessories may use the wider 4-pin Molex connector instead. Each SATA connector has an L-shaped key, so it only fits one way. Connect one SATA power cable to each drive, and route spare cables out of the way so air can move freely.
Check the fit before powering on
Before you switch the supply on, look over every connector and confirm each one sits flat with its clip locked. A connector that hangs halfway out can keep the computer from starting or cause a part to lose power. Shut the computer down and unplug it before you reseat any cable, and follow the manual that came with your motherboard and power supply if a socket does not match any cable you have.
What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply
A 1000 W fully modular supply with a native 12V-2x6 cable, ATX 3.1 and PCIe 5.1 support, and a low-noise 120mm fan.
View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply
A 1000 W fully modular supply with a native 12V-2x6 connector, ATX 3.1 and PCIe 5.1 support, and a 10-year manufacturer warranty.
View on Amazon
MSI MAG A850GL PCIE5
An 850 W fully modular supply with 80 Plus Gold certification, ATX 3.1 and PCIe 5.1 support, and a native dual-color 12V-2x6 cable.
View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply
An 850 W fully modular supply with 80 Plus Gold efficiency, native 12V-2x6 connectors, and Smart Zero Fan technology for quieter low-load running.
View on AmazonThese come from our ranked list Best Power Supply, which compares them spec by spec.
FAQ
Can a PCIe cable plug into the CPU socket?
No. The two connectors have different pin layouts and keying, so a PCIe cable does not fit a CPU socket. Always use the 8-pin cable that fits the CPU socket on the motherboard.
What is the 12V-2x6 connector for?
It is the newer power connector used by some graphics cards, with a single cable that runs straight from the power supply instead of an adapter. Check whether your graphics card has this socket before choosing a supply.
Do all power supplies include the same cables?
No. Fully modular supplies let you attach only the cables your build needs, while other supplies have cables fixed in place. Check the cable list in the supply's manual against the sockets on your motherboard, graphics card and drives.




