Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

PSU Size for an ITX Case

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A full-size ATX power supply fits an ITX case only when the case lists ATX PSU support. Many ITX cases take SFX or SFX-L supplies instead, so check the case's spec sheet for the PSU form factor and the PSU length it accepts. The four supplies here are all full-size ATX 3.1 units, with 1000W and 850W options and fully modular cables.

  1. Check the case's PSU form factor

    Look in the case's spec sheet for the PSU form factor it accepts: ATX, SFX or SFX-L. A full-size ATX supply fits only a case that lists ATX support. Also check the PSU length limit the case lists, and compare it with the supply's length. If the case lists only SFX, a full-size ATX supply does not fit, no matter the wattage.

  2. Match the wattage to the parts

    Add up the power requirement published for each part in the build, then pick a supply that covers that total with headroom. The supplies here run at 1000W and 850W. A 1000W supply suits builds with parts that publish higher power requirements, while an 850W supply suits builds with lower published requirements. Check the requirement published for the graphics card and the processor before you choose.

  3. Use the modular cables

    All four supplies here are fully modular, so you connect only the cables the build needs. Fewer cables leave more room for air inside a small case. The CORSAIR RM1000e and RM1000x include a native 12V-2x6 cable for modern graphics cards, and the MSI and Thermaltake supplies include one too. Route each cable through the case's cable channels and check that each connector seats fully.

  4. Install it with the case open

    Shut the PC down and unplug it before you open the case. Follow the case manual for the PSU bracket and the PSU manual for the mounting screws. The Thermaltake supply has low-profile flat black cables that make cable management easier, and its Smart Zero Fan adjusts fan speed based on load. Do not open the power supply itself; contact the maker if it fails.

What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

A 1000W fully modular ATX 3.1 supply with a native 12V-2x6 cable, a 120mm rifle bearing fan, 105°C-rated capacitors and a 7-year warranty.

View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

A 1000W fully modular ATX 3.1 supply with a native 12V-2x6 connector, Cybenetics Gold up to 91% efficiency and a 10-year warranty.

View on Amazon
MSI MAG A850GL PCIE5

MSI MAG A850GL PCIE5

An 850W fully modular ATX 3.1 supply with 80 PLUS GOLD, a native dual-color 12V-2x6 cable and a 10-year limited warranty.

View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

An 850W fully modular ATX 3.1 supply with 80 PLUS Gold up to 90% efficiency, Smart Zero Fan and a 5-year warranty.

View on Amazon

These come from our ranked list Best Power Supply, which compares them spec by spec.

FAQ

Can a full-size ATX PSU fit in an ITX case?

Only when the case lists ATX PSU support. Check the case's spec sheet for the PSU form factor and length limit before you buy the supply.

What wattage should I pick for an ITX build?

Add up the power requirement published for each part, then pick a supply that covers that total. The supplies here run at 1000W and 850W.

Do I need modular cables in a small case?

Fully modular cables help in a small case because you connect only the cables the build needs. All four supplies here are fully modular.

Ranked power supplies guides