How to Sync a Wireless Mouse
Syncing a wireless mouse means linking it to your computer through its USB receiver or through Bluetooth. For a receiver mouse, plug the receiver into a USB port and switch the mouse on. For a Bluetooth mouse, put the mouse in pairing mode and select it in your computer's Bluetooth settings. The exact switch and button steps come from the maker's manual for your model.
Check which connection your mouse uses
Wireless mice connect in two ways: through a small USB receiver or through Bluetooth. The Logitech G305 uses LIGHTSPEED wireless with a nano receiver that stores in the mouse. The Logitech G502 LIGHTSPEED also uses LIGHTSPEED wireless and is POWERPLAY compatible. The Razer Orochi V2 and the Razer Basilisk V3 X offer two wireless modes, HyperSpeed and Bluetooth, so the sync steps depend on the mode you pick. Read the manual for your model to see which connection it uses and where its power switch and pairing control sit.
Connect with the USB receiver
Take the receiver out of its storage slot in the mouse, if your model has one, and plug it into a USB port on the computer. Switch the mouse on with the power switch on its underside. Move the mouse and check that the pointer responds. If the pointer does not move, try a different USB port, check the battery, and follow the reconnection steps in the maker's manual. Keep the receiver with the mouse when you travel, since the mouse needs that receiver for its wireless link.
Pair over Bluetooth
Open the Bluetooth settings on your computer and turn Bluetooth on. Put the mouse in pairing mode using the switch or button steps in the maker's manual, then select the mouse name when it appears in the list of devices. Confirm the pairing and move the mouse to check that the pointer responds. The Razer Orochi V2 and the Razer Basilisk V3 X both offer Bluetooth alongside HyperSpeed wireless, so set the mode switch to Bluetooth before you start pairing.
If the mouse does not respond
Check the battery first: the Logitech G305 runs on 1 AA battery, and the Razer Orochi V2 takes a single AA or AAA battery. Reseat the USB receiver in another port, or remove the mouse from the Bluetooth device list and pair it again. Check that no other receiver or paired computer is holding the connection. If the mouse still does not respond, follow the troubleshooting steps in the maker's manual and contact the maker for support.
What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse
A LIGHTSPEED wireless mouse with a nano receiver that stores in the mouse and a Hero 12K sensor, for receiver-based syncing.
View on Amazon
Logitech G502 LIGHTSPEED Wireless Gaming Mouse
A LIGHTSPEED wireless mouse that is POWERPLAY compatible, with a HERO 25K sensor and 11 programmable buttons.
View on Amazon
Razer Orochi V2 Wireless Gaming Mouse
A wireless mouse with HyperSpeed and Bluetooth modes and an 18K DPI sensor, so it syncs by receiver or by Bluetooth pairing.
View on Amazon
Razer Basilisk V3 X HyperSpeed Customizable Wireless Gaming Mouse
A wireless mouse with HyperSpeed and Bluetooth modes, an 18K optical sensor, and 9 programmable controls for multi-device setups.
View on AmazonThese come from our ranked list Best Wireless Mouse, which compares them spec by spec.
FAQ
Do I need the USB receiver for a wireless mouse?
A receiver mouse needs its USB receiver plugged into the computer for the wireless link. The Logitech G305 stores its nano receiver in the mouse. A Bluetooth mouse pairs through the computer's Bluetooth settings instead, with no receiver.
Can one mouse connect two ways?
Yes. The Razer Orochi V2 and the Razer Basilisk V3 X offer HyperSpeed wireless and Bluetooth modes. Set the mode switch to the connection you want, then follow the receiver steps or the Bluetooth pairing steps for that mode.
Why does my wireless mouse not move the pointer?
Check the battery, the power switch, and the connection: reseat the USB receiver or pair the mouse again over Bluetooth. If it still does not respond, follow the troubleshooting steps in the maker's manual.



