What Is Mouse DPI?
DPI stands for dots per inch, and it measures how far the cursor moves on screen for each inch you move the mouse. At 1000 DPI, moving the mouse one inch moves the cursor 1000 pixels. The sections below explain what the number means, how to change it, and what else matters in a mouse.
What DPI measures
DPI stands for dots per inch. It counts how many pixels the cursor crosses on screen when you move the mouse one inch across the desk. At 500 DPI the cursor moves 500 pixels per inch, and at 4000 DPI it moves 4000 pixels per inch. A higher DPI setting moves the cursor farther for the same hand movement, and a lower setting moves it a shorter distance. The number describes sensitivity only; it says nothing about the shape of the mouse or the quality of its sensor.
High DPI and low DPI
A high DPI setting suits fast movement across the screen, since the cursor covers more distance with less hand travel. A low DPI setting suits small, careful movements, such as aiming at a small target, since the cursor moves a shorter distance for the same hand movement. Neither setting is better on its own. The right choice depends on the size of your screen and the work you do, so change the setting and see which distance feels right for the task in front of you.
How to change the DPI setting
Mice change DPI through software. The Redragon M908 lists 5 adjustable DPI levels at 500, 1000, 2000, 3000 and 6200 DPI, and you can adjust it by 100 from 200 to 12400 through software. The Redragon M612 lists 5 DPI levels at 500, 1000, 2000, 3000 and 4000 DPI, with more options from 500 to 8000 through software. The GravaStar M2 adjusts DPI through its software. Check your own mouse for a DPI setting in its software.
DPI is not the whole mouse
DPI is one number among several. The Logitech G305 uses a HERO 12K sensor with 400 IPS precision and a 1 ms report rate. The Redragon M908 uses a Pixart PAW3327 sensor with a 1000 Hz polling rate and 30G acceleration. The GravaStar M2 uses a PAW3395DM sensor with a 1K Hz polling rate. Polling rate is how often the mouse reports its position, and the sensor reads the movement. Read the sensor, polling rate and DPI figures together when you compare mice, and check the requirements published for your software or game.
What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse
A wireless mouse with a HERO 12K sensor at up to 12,000 DPI, 6 programmable buttons and 250 hours of battery on one AA battery.
View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys
A wired mouse with up to 12,400 DPI across 5 adjustable levels, a Pixart PAW3327 sensor and 18 programmable buttons.
View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse
A wireless mouse with a PAW3395DM sensor at up to 26,000 DPI, 5 programmable buttons and up to 85 hours of battery.
View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys
A wired mouse with 5 default DPI levels of 500, 1000, 2000, 3000 and 4000 DPI, 11 programmable buttons and RGB backlight.
View on AmazonThese come from our ranked list Best Mouse, which compares them spec by spec.
FAQ
What DPI should I use for gaming?
There is no single right setting. A lower DPI gives finer control for aiming, while a higher DPI covers the screen with less hand movement. Try the levels your mouse lists, such as 500, 1000, 2000 or 4000 DPI, and keep the one that feels right.
Is a higher DPI mouse better?
No. A higher maximum DPI only means the cursor can move farther per inch of hand movement. The sensor, polling rate and shape matter as much as the DPI figure, so judge the mouse on the whole list of specs, not one number.
What is polling rate?
Polling rate is how often the mouse reports its position to the computer. The Redragon M908 and the GravaStar M2 both list a 1000 Hz polling rate, and the Logitech G305 lists a 1 ms report rate.




