Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Clean a Computer Mouse

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Unplug a wired mouse or switch a wireless mouse off, then wipe the shell with a dry microfiber cloth and clean the sensor opening and the feet with a dry cotton swab. For sticky grime, dampen the cloth lightly with water and mild soap, wipe, then dry the mouse before you plug it back in or switch it on. Never spray liquid onto the mouse and never open the shell.

  1. Unplug or switch the mouse off

    Unplug a wired mouse from the computer before you touch it. Switch a wireless mouse off so clicks and cursor movement do not open windows while you clean. If the mouse runs on a battery, take the battery out while you work, and put the receiver in the nano receiver storage inside the mouse body if the mouse has a separate one. Work on a clean, dry surface with the mouse upside down or on its side.

  2. Wipe the shell and buttons

    Start with a dry microfiber cloth and wipe the top, sides and buttons to lift dust and skin oil. For sticky spots, dampen the cloth lightly with water and a drop of mild soap, wipe the shell, then go over it again with a cloth dampened with plain water. Dry the mouse with a clean cloth before you switch it on, and keep liquid out of the seams around the buttons.

  3. Clean the sensor and the feet

    Turn the mouse over and look at the sensor lens and the feet on the base. Wipe around the sensor lens with a dry cotton swab and pick out dust or hair caught around the feet with the swab. Do not press on the lens and do not use a wet cloth on it. A dirty sensor or a foot with grit under it makes the cursor skip or stick.

  4. Clean the scroll wheel and gaps

    Dust and grime collect in the gap around the scroll wheel and between the buttons. Roll the wheel slowly while you wipe it with a dry cloth, then run a dry cotton swab or a soft brush along the gaps to lift what the cloth missed. Do not force anything into the gaps or pry at the buttons, since that can bend or break the parts inside.

  5. Dry it and plug it back in

    Leave the mouse to dry fully before you plug it back in or switch it on, so no dampness stays in the seams. Plug a wired mouse back into the computer or switch a wireless mouse on, then move the cursor and click each button to check that all of them respond. Clean again when the shell feels sticky, the buttons feel gritty or the cursor skips.

What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

A wireless mouse with a 12,000 DPI Hero sensor and 6 programmable buttons, whose nano receiver stores inside the body, so nothing dangles while you wipe it.

View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

A wired mouse with 12,400 DPI, 18 programmable buttons and smooth TEFLON feet pads, with a 6 ft braided-fiber cable you unplug before cleaning.

View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse

GravaStar Mercury M2 Wireless Gaming Mouse

A wireless mouse with a hollowed-out design, 26,000 DPI and 5 programmable buttons, whose open frame needs a soft brush to clear dust from the gaps.

View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

A wired mouse with 8,000 DPI, 11 programmable buttons and a skin-friendly frosted coating that stays fingerprint-free on the surface you wipe.

View on Amazon

These come from our ranked list Best Mouse, which compares them spec by spec.

FAQ

Can I use water to clean my mouse?

Yes, in small amounts. Dampen a cloth lightly and wipe the shell, then dry the mouse before you switch it on. Never spray water on the mouse or let liquid run into the buttons, the wheel or the sensor opening.

How do I clean the sensor on my mouse?

Turn the mouse over and wipe around the sensor lens with a dry cotton swab. Do not press on the lens or use a wet cloth on it. If the cursor still moves badly, clean the feet and check the surface under the mouse.

How often should I clean my mouse?

Wipe it when the shell feels sticky, the buttons feel gritty or the cursor skips. Clean the gaps around the buttons and the scroll wheel before grime builds up, and check the sensor and feet when the cursor starts to stick.

Ranked mice guides